General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad relativa | 23.0 °C | 1.39 [-] Show Supplier Material materials with Densidad relativa of 1.39 [-] | ASTM D 792 | |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 1.4 % Show Supplier Material materials with Elongación of 1.4 % | ISO 527 | break, 5 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 80 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 80 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 580 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 580 J/m | ASTM D 4812 | 23°C |
Módulo de flexión | 23.0 °C | 23.3 GPa Show Supplier Material materials with Módulo de flexión of 23.3 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 27.5 GPa Show Supplier Material materials with Módulo elástico of 27.5 GPa | ISO 527 | 1 mm/min |
Resistencia a la compresión | 23.0 °C | 234 MPa Show Supplier Material materials with Resistencia a la compresión of 234 MPa | SABIC method |
Resistencia a la flexión | 23.0 °C | 350 MPa Show Supplier Material materials with Resistencia a la flexión of 350 MPa | ISO 178 | 2 mm/min |
Resistencia a la tracción | 23.0 °C | 257 MPa Show Supplier Material materials with Resistencia a la tracción of 257 MPa | ISO 527 | break, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 7 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 32 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 32 kJ/m² | ISO 180/1U | 80*10*4, 23°C |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 1.80 MPa | 198 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 198 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm |
Temperatura de flexión bajo carga | 198 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 198 °C |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Contracción | 23.0 °C | 0.1 % Show Supplier Material materials with Contracción of 0.1 % | ASTM D 955 | 24 hrs |
Contracción transversal | 23.0 °C | 0.1 % Show Supplier Material materials with Contracción transversal of 0.1 % | ASTM D 955 | 24 hrs |
Velocidad de flujo de la masa derretida | 10 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 10 g/10min | ASTM D 1238 | 380°C/6.7 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Water Treatment/Filtration, Respiratory, Surgical Devices | |
Availability | Europe,Asia,Americas | |
Processing methods | Maximum Moisture Content: 0.02% | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |