LNP™ COLORCOMP™ Compound E1000CE

Want to keep this datasheet? Save it now in your required format

Description

LNP* COLORCOMP* E1000CE is an unfilled custom color compound based on PEI resin. Added features of this grade include: Easy Molding, UV Stabilized, Clean Compound System.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Sistemas mecánicos

Maquinaria industrial

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	1.25 % Show Supplier Material materials with Absorción de agua of 1.25 %	ASTM D 570 \| (23°C/Saturated)
Densidad relativa	23.0 °C	1.27 [-] Show Supplier Material materials with Densidad relativa of 1.27 [-]	ASTM D 792 \|
Índice límite de óxigeno	23.0 °C	44 % Show Supplier Material materials with Índice límite de óxigeno of 44 %

Mecánica

Property	Temperature	Value	Comment
Dureza Rockwell M	23.0 °C	109 [-] Show Supplier Material materials with Dureza Rockwell M of 109 [-]	ASTM D 785 \|
Elongación	23.0 °C	7 % Show Supplier Material materials with Elongación of 7 %	ASTM D 638 \| yld, Type I, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	32 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 32 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	1335 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 1335 J/m	ASTM D 4812 \| 23°C
Módulo de flexión	23.0 °C	3.5 GPa Show Supplier Material materials with Módulo de flexión of 3.5 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Módulo elástico	23.0 °C	3.6 GPa Show Supplier Material materials with Módulo elástico of 3.6 GPa	ASTM D 638 \| 5 mm/min
Resistencia a la flexión	23.0 °C	165 MPa Show Supplier Material materials with Resistencia a la flexión of 165 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	110 MPa Show Supplier Material materials with Resistencia a la tracción of 110 MPa	ASTM D 638 \| yld, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	32 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 32 kJ/m²	ASTM D 256 \| notched, 23°C
Taber Abrasion	23.0 °C	10 mg/1000cy Show Supplier Material materials with Taber Abrasion of 10 mg/1000cy	ASTM D 1044 \| CS-17, 1 kg

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	5.58E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5.58E-5 1/K	ASTM E 831 \| -20°C to 150°C
Conductividad térmica	23.0 °C	0.22 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.22 W/(m·K)	ASTM C177
Heat deflection temperature, 0.45 MPa		207 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 207 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa		198 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 198 °C	ASTM D 648 \| 6.4 mm, unannealed
Temperatura de flexión bajo carga		198 - 207 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 198 - 207 °C
Temperatura de reblandecimiento Vicat		218 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 218 °C	ASTM D 1525 \| Rate B/50
Inflamabilidad	NBS Smoke Density, Flaming, Ds 4 min: 2- ASTM E 662

Eléctrico

Property	Temperature	Value	Comment
Dissipation factor, 1kHz	23.0 °C	1.3E-3 [-] Show Supplier Material materials with Dissipation factor, 1kHz of 1.3E-3 [-]	ASTM D 150
Factor de disipación	23.0 °C	2.5E-3 [-] Show Supplier Material materials with Factor de disipación of 2.5E-3 [-]	ASTM D 150 \| 2450 MHz
Rigidez dieléctrica	23.0 °C	32.6 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 32.6 kV/mm	ASTM D 149 \| in air, 1.6 mm
Volume resistivity	23.0 °C	1.00E+17 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+17 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		17.8 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 17.8 g/10min	ASTM D 1238 \| 337°C/6.6 kgf

Technological properties

Property
Application areas	Data Management, Industrial Material Handling, Electronic Material Handling, Semiconductor, Tray
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 150°C Drying Time: 4 to 6.0hrs Maximum Moisture Content: 0.02% Melt Temperature: 360 to 400.0°C Nozzle Temperature: 390 to 400.0°C Front - Zone 3 Temperature: 380 to 400.0°C Middle - Zone 2 Temperature: 370 to 390.0°C Rear - Zone 1 Temperature: 360 to 380.0°C Mold Temperature: 140 to 180.0°C Back Pressure: 0.3 to 0.7MPa Vent Depth: 0.025 to 0.076mm Screw speed (Circumferential speed): 0.2 to 0.3m/s
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.