LNP™ THERMOCOMP™ AM Compound EZ006EXAR1

Want to keep this datasheet? Save it now in your required format

Description

LNP™ THERMOCOMP™ AM, grade name EZ006EXAR1, is a compound based on PEI resin containing 30% glass fiber for Large Format Additive manufacturing (LFAM) applications requiring better dimensional stability and low CTE. PEI compounds, based on SABIC's inherently flame-retardant ULTEM(TM) resins, offer high temperature performance, excellent strength-to-weight ratio, high modulus and low creep

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Fabricación

Fabricación de aditivos

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.51 [-] Show Supplier Material materials with Densidad relativa of 1.51 [-]	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	1.5 % Show Supplier Material materials with Elongación of 1.5 %	Modified ASTM D638 \| 5mm/min
Resistencia a la flexión	23.0 °C	67 MPa Show Supplier Material materials with Resistencia a la flexión of 67 MPa	Modified ASTM D790 \| 5mm/min
Resistencia a la tracción	23.0 °C	45 MPa Show Supplier Material materials with Resistencia a la tracción of 45 MPa	Modified ASTM D638 \| 5mm/min

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	207 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 207 °C	ASTM D 648 \| 6.4 mm, unannealed
Temperatura de flexión bajo carga	207 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 207 °C

Technological properties

Property
Application areas	Additive Plastic
Availability	Europe,Asia,Americas
Processing methods	Extruder L/D: 24- Drying Temperature: 150°C Drying Time: 4 to 6.0hrs Maximum Moisture Content: 0.02% Barrel - Zone 1 Temperature: 320 to 360.0°C Barrel - Zone 2 Temperature: 330 to 370.0°C Barrel - Zone 3 Temperature: 340 to 380.0°C Barrel - Zone 4 Temperature: 350 to 400.0°C Nozzle Temperature: 360 to 400.0°C Melt Temperature: 360 to 400.0°C Bed Temperature: 80 to 150.0°C Extruder Pressure: <13.5MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.