LNP™ THERMOCOMP™ AM Compound DF004XXAR1

Want to keep this datasheet? Save it now in your required format

Description

LNP™ THERMOCOMP™ AM, grade name DF004XXAR1, is a compound based on PC resin containing 20% glass fiber for Large Format Additive Manufacturing (LFAM) applications. PC based compounds deliver higher strength, higher temperature performance and higher throughput compared to ABS and PPE, as well as excellent ductility and smooth surface finish.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Fabricación

Fabricación de aditivos

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.35 [-] Show Supplier Material materials with Densidad relativa of 1.35 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.1 % Show Supplier Material materials with Elongación of 2.1 %	Modified ASTM D638 \| 5mm/min
Resistencia a la flexión	23.0 °C	65 MPa Show Supplier Material materials with Resistencia a la flexión of 65 MPa	Modified ASTM D790 \| 5mm/min
Resistencia a la tracción	23.0 °C	44 MPa Show Supplier Material materials with Resistencia a la tracción of 44 MPa	Modified ASTM D638 \| 5mm/min

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	139 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 139 °C	ASTM D 648 \| 3.2mm, annealed,
Temperatura de flexión bajo carga	139 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 139 °C

Technological properties

Property
Application areas	Additive Plastic
Availability	Europe,Asia,Americas
Processing methods	Extruder L/D: 24- Drying Temperature: 120°C Drying Time: 4hrs Maximum Moisture Content: 0.02% Barrel - Zone 1 Temperature: 250 to 280.0°C Barrel - Zone 2 Temperature: 260 to 290.0°C Barrel - Zone 3 Temperature: 260 to 290.0°C Barrel - Zone 4 Temperature: 260 to 290.0°C Nozzle Temperature: 260 to 290.0°C Melt Temperature: 260 to 290.0°C Bed Temperature: 100 to 120.0°C Extruder Pressure: <11MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.