LNP™ STAT-KON™ Compound ME003S - Asia

Want to keep this datasheet? Save it now in your required format

Description

LNP STAT-KON ME003S is a compound based on Polypropylene resin containing 15% Carbon Fiber. Added features of this material include: Electrically Conductive, Heat Stabilized.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	1 % Show Supplier Material materials with Elongación of 1 %	ISO 527 \| break
Impact strength, Izod notched, ASTM	23.0 °C	53 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 53 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	128 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 128 J/m	ASTM D 4812 \| 23°C
Módulo de flexión	23.0 °C	7 GPa Show Supplier Material materials with Módulo de flexión of 7 GPa	ISO 178
Resistencia a la flexión	23.0 °C	62 MPa Show Supplier Material materials with Resistencia a la flexión of 62 MPa	ISO 178
Resistencia a la tracción	23.0 °C	44 MPa Show Supplier Material materials with Resistencia a la tracción of 44 MPa	ISO 527 \| break
Resistencia al choque, ensayo Izod entallado	23.0 °C	1 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 1 kJ/m²	ISO 180/1A \| 80104, 23°C

Eléctrico

Property	Temperature	Value	Comment
Sheet resistivity, ROA	23.0 °C	1000 - 1000000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1000 - 1000000 Ω	ASTM D 257

Technological properties

Property
Application areas	Pump, Oil/Gas, Enclosures
Availability	Asia,Americas
Processing methods	Drying Temperature: 80°C Mold Temperature: 30 to 50.0°C Back Pressure: 0.2 to 0.3MPa Melt Temperature: 225 to 250.0°C Middle - Zone 2 Temperature: 215 to 225.0°C Screw Speed: 30 to 60.0rpm Front - Zone 3 Temperature: 240 to 250.0°C Drying Time: 4hrs Rear - Zone 1 Temperature: 195 to 205.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.