LNP™ LUBRICOMP™ Compound KFL36 - Asia

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP KFL36 is a compound based on Acetal Copolymer resin containing 30% Glass Fiber, 15% PTFE. Added feature of this material is: Wear Resistant.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.75 g/cm³ Show Supplier Material materials with Densidad of 1.75 g/cm³	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.3 % Show Supplier Material materials with Elongación of 2.3 %	ISO 527 \| break, 5 mm/min
Módulo de flexión	23.0 °C	9.9 GPa Show Supplier Material materials with Módulo de flexión of 9.9 GPa	ISO 178 \| 2 mm/min
Resistencia a la flexión	23.0 °C	130 MPa Show Supplier Material materials with Resistencia a la flexión of 130 MPa	ISO 178
Resistencia a la tracción	23.0 °C	84 MPa Show Supplier Material materials with Resistencia a la tracción of 84 MPa	ISO 527 \| break, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 5 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	25 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 25 kJ/m²	ISO 180/1U \| 80104, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	161 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 161 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga	161 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 161 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.7 % Show Supplier Material materials with Contracción of 0.7 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Application areas	Document Handling, Wireless Communications
Availability	Europe,Asia,Americas
Processing methods	Front - Zone 3 Temperature: 210 to 220.0°C Melt Temperature: 200 to 215.0°C Middle - Zone 2 Temperature: 195 to 205.0°C Mold Temperature: 80 to 110.0°C Drying Temperature: 80°C Rear - Zone 1 Temperature: 175 to 190.0°C Screw Speed: 30 to 60.0rpm Back Pressure: 0.2 to 0.3MPa Drying Time: 4hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.