NORYL™ Resin NH5120 - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ NH5120 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm. NORYL NH5120 resin offers a good balance of heat, flow, hydrolytic stability, low creep and dimensional stability along with mechanical property retention in tough outdoor environments. This material is an excellent candidate for outdoor housings / enclosures, HVAC components, and photovoltaic / solar junction box applications.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Medical Equipment General

Ingeniería eléctrica

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.25 % Show Supplier Material materials with Absorción de agua of 0.25 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.08 g/cm³ Show Supplier Material materials with Densidad of 1.08 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.1 [-] Show Supplier Material materials with Densidad relativa of 1.1 [-]	ASTM D 792
Moisture absorption	23.0 °C	0.05 % Show Supplier Material materials with Moisture absorption of 0.05 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	4.4 % Show Supplier Material materials with Elongación of 4.4 %	ISO 527 \| yield, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	186 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 186 J/m	ASTM D 256 \| notched, 23°C
Instrumented Impact, Total Energy	23.0 °C	53 J Show Supplier Material materials with Instrumented Impact, Total Energy of 53 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.6 GPa Show Supplier Material materials with Módulo de flexión of 2.6 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.7 GPa Show Supplier Material materials with Módulo elástico of 2.7 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	105 MPa Show Supplier Material materials with Resistencia a la flexión of 105 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	57 MPa Show Supplier Material materials with Resistencia a la tracción of 57 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	17 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 17 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Resistencia al choque, ensayo Izod entallado	23.0 °C	15 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 15 kJ/m²	ISO 180/1A \| notched 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	8.1E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 8.1E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	7.7E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.7E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		700 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 700 °C	IEC 60695-2-13 \| 2.0 mm
Heat deflection temperature, 0.45 MPa		134 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 134 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa		118 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 118 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Relative temperature index, electrical		110 °C Show Supplier Material materials with Relative temperature index, electrical of 110 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		110 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 110 °C	UL 746B
Temperatura de flexión bajo carga		118 - 134 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 118 - 134 °C
Temperatura de reblandecimiento Vicat		138 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 138 °C	ISO 306 \| Rate B/120
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=631687- - <br> Glow Wire Ignitability Temperature, 1.0 mm: 725°C IEC 60695-2-13 <br> Glow Wire Ignitability Temperature, 1.5 mm: 725°C IEC 60695-2-13 <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> UL Recognized, 94V-1 Flame Class Rating: ≥1.5mm UL 94

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 1
Índice de seguimiento comparativo	23.0 °C	2 V Show Supplier Material materials with Índice de seguimiento comparativo of 2 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		12.2 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 12.2 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Velocidad de flujo del volumen derretido		11 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 11 cm³/10min	ISO 1133 \| MVR at 280°C/5.0 kg

Technological properties

Property
Application areas	Enclosures, Electronic Components, Monitoring and Imaging, Wiring Devices
Availability	Europe,Asia,MEA,Americas
Processing methods	Drying Temperature: 105 to 110.0°C Drying Time: 3 to 4.0hrs Drying Time (Cumulative): 8hrs Maximum Moisture Content: 0.02% Melt Temperature: 280 to 310.0°C Nozzle Temperature: 280 to 310.0°C Front - Zone 3 Temperature: 270 to 310.0°C Middle - Zone 2 Temperature: 260 to 305.0°C Rear - Zone 1 Temperature: 250 to 300.0°C Mold Temperature: 75 to 105.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 20 to 100.0rpm Shot to Cylinder Size: 30 to 70.0%
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.