LNP™ THERMOCOMP™ Compound D351RCC

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP D351RCC is a compound based on Post-Consumer Recycling (PCR) Polycarbonate resin containing Glass Fiber, Flame Retardant. Added features of this material include: colorable, high modulus, good flatness, good ductility, Non-Brominated & Non-Chlorinated Flame Retardant. PCR polycarbonate content up to 40%.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.425 g/cm³ Show Supplier Material materials with Densidad of 1.425 g/cm³	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.7 % Show Supplier Material materials with Elongación of 2.7 %	ISO 527 \| break, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	130 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 130 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	465 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 465 J/m	ASTM D 4812 \| 23°C
Módulo de flexión	23.0 °C	7.8 GPa Show Supplier Material materials with Módulo de flexión of 7.8 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	9.4 GPa Show Supplier Material materials with Módulo elástico of 9.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	183 MPa Show Supplier Material materials with Resistencia a la flexión of 183 MPa	ISO 178 \| 2 mm/min
Resistencia a la tracción	23.0 °C	127 MPa Show Supplier Material materials with Resistencia a la tracción of 127 MPa	ISO 527 \| break, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 13 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	31 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 31 kJ/m²	ISO 180/1U \| 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	2E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	6.8E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 6.8E-5 1/K	ASTM E 831 \| -40°C to 40°C
Heat deflection temperature, 0.45 MPa		118 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 118 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		113 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 113 °C	ASTM D 648 \| 3.2mm, unannealed
Relative temperature index, electrical		80 °C Show Supplier Material materials with Relative temperature index, electrical of 80 °C	UL 746B
Relative temperature index, mechanical impact		80 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C	UL 746B
Relative temperature index, mechanical strength		80 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 80 °C	UL 746B
Temperatura de flexión bajo carga		113 - 118 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 113 - 118 °C
Temperatura de reblandecimiento Vicat		126 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 126 °C	ISO 306 \| Rate B/120
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=104051537- - <br> UL Recognized, 94V-0 Flame Class Rating: ≥0.8mm UL 94

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.1 % Show Supplier Material materials with Contracción of 0.1 %	ASTM D 955 \| 24 hrs
Contracción transversal	23.0 °C	0.1 % Show Supplier Material materials with Contracción transversal of 0.1 %	ASTM D 955 \| 24 hrs
Velocidad de flujo de la masa derretida		36 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 36 g/10min	ASTM D 1238 \| 300°C/2.16 kgf
Velocidad de flujo del volumen derretido		31 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 31 cm³/10min	ISO 1133 \| MVR at 300°C/2.16 kg

Technological properties

Property
Application areas	Data Transfer, Electronic Components, Personal Computing, Wireless Communications
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 110°C Drying Time: 3 to 6.0hrs Maximum Moisture Content: 0.02% Melt Temperature: 285 to 310.0°C Nozzle Temperature: 285 to 305.0°C Front - Zone 3 Temperature: 280 to 300.0°C Middle - Zone 2 Temperature: 270 to 290.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Mold Temperature: 80 to 110.0°C Back Pressure: 0.1 to 0.3MPa Screw Speed: 50 to 90.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.