LNP™ THERMOCOMP™ Compound UX08319

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP UX08319 is PPA base glass fiber filled compounds, good for LDS (Laser direct structuring)application. Additional feature is high heat. ...

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	2.14 g/cm³ Show Supplier Material materials with Densidad of 2.14 g/cm³	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	1.4 % Show Supplier Material materials with Elongación of 1.4 %	ASTM D 638 \| brk, Type I, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	40 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 40 J/m	ASTM D 256
Módulo de flexión	23.0 °C	11.5 GPa Show Supplier Material materials with Módulo de flexión of 11.5 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Módulo elástico	23.0 °C	13.8 GPa Show Supplier Material materials with Módulo elástico of 13.8 GPa	ASTM D 638 \| 5 mm/min
Resistencia a la flexión	23.0 °C	185 MPa Show Supplier Material materials with Resistencia a la flexión of 185 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	125 MPa Show Supplier Material materials with Resistencia a la tracción of 125 MPa	ASTM D 638 \| brk, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	40 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 40 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	265 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 265 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga	265 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 265 °C

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica	23.0 °C	6.2 [-] Show Supplier Material materials with Constante dieléctrica of 6.2 [-]	SABIC method \| 1.9 GHz
Factor de disipación	23.0 °C	0.02 [-] Show Supplier Material materials with Factor de disipación of 0.02 [-]	SABIC method

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.33 % Show Supplier Material materials with Contracción of 0.33 %	SABIC method
Contracción transversal	23.0 °C	0.35 % Show Supplier Material materials with Contracción transversal of 0.35 %	SABIC method

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120 to 130.0°C Drying Time: 4 to 6.0hrs Melt Temperature: 315 to 330.0°C Front - Zone 3 Temperature: 300 to 330.0°C Middle - Zone 2 Temperature: 310 to 330.0°C Rear - Zone 1 Temperature: 300 to 320.0°C Mold Temperature: 140 to 165.0°C Back Pressure: 20 to 40.0MPa Screw Speed: 30 to 70.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.