LNP™ STAT-KON™ Compound DX02728C

Want to keep this datasheet? Save it now in your required format

Description

LNP STAT-KON* DX02728C is a compound based on Polycarbonate resin containing Proprietary Filler(s) Added features of this material include: Clean Compounding System, Electrically Conductive.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.24 g/cm³ Show Supplier Material materials with Densidad of 1.24 g/cm³	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6.5 % Show Supplier Material materials with Elongación of 6.5 %	ASTM D 638 \| break
Impact strength, Izod notched, ASTM	23.0 °C	64 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 64 J/m	ASTM D 256
Instrumented Impact, at Peak	23.0 °C	14 J Show Supplier Material materials with Instrumented Impact, at Peak of 14 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	5.9 GPa Show Supplier Material materials with Módulo de flexión of 5.9 GPa	ASTM D 790
Resistencia a la flexión	23.0 °C	165 MPa Show Supplier Material materials with Resistencia a la flexión of 165 MPa	ASTM D 790
Resistencia a la tracción	23.0 °C	99 MPa Show Supplier Material materials with Resistencia a la tracción of 99 MPa	ASTM D 638 \| break
Resistencia al choque, ensayo Izod entallado	23.0 °C	64 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 64 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	143 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 143 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga	143 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 143 °C

Technological properties

Property
Application areas	Data Management
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120°C Drying Time: 4hrs Maximum Moisture Content: 0.02% Melt Temperature: 305 to 325.0°C Front - Zone 3 Temperature: 320 to 330.0°C Middle - Zone 2 Temperature: 310 to 320.0°C Rear - Zone 1 Temperature: 295 to 305.0°C Mold Temperature: 80 to 110.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.