LNP™ LUBRICOMP™ Compound C2801

Want to keep this datasheet? Save it now in your required format

Description

LNP™ LUBRICOMP™ Compound C2801 is a 5% PTFE reinforced PC+ABS, wear resistant, flame retardant compound for moving components in business equipment. Medium heat performance

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.22 [-] Show Supplier Material materials with Densidad relativa of 1.22 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	110 % Show Supplier Material materials with Elongación of 110 %	ASTM D 638 \| brk, Type I, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	133 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 133 J/m	ASTM D 256 \| notched, 23°C
Módulo de flexión	23.0 °C	2.7 GPa Show Supplier Material materials with Módulo de flexión of 2.7 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Resistencia a la flexión	23.0 °C	95 MPa Show Supplier Material materials with Resistencia a la flexión of 95 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	51 MPa Show Supplier Material materials with Resistencia a la tracción of 51 MPa	ASTM D 638 \| brk, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	133 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 133 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	82 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 82 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	60 °C Show Supplier Material materials with Relative temperature index, electrical of 60 °C	UL 746B
Relative temperature index, mechanical impact	60 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 60 °C	UL 746B
Relative temperature index, mechanical strength	60 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 60 °C	UL 746B
Temperatura de flexión bajo carga	82 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 82 °C
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221032- - <br> UL Recognized, 94-5VB Flame Class Rating: ≥2.5mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94V-1 Flame Class Rating: ≥1mm UL 94 <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=228469- -

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 3
Índice de seguimiento comparativo	23.0 °C	1 V Show Supplier Material materials with Índice de seguimiento comparativo of 1 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.4 % Show Supplier Material materials with Contracción of 0.4 %	SABIC method \| 3.2 mm
Contracción transversal	23.0 °C	0.3 % Show Supplier Material materials with Contracción transversal of 0.3 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	LED Lighting
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 75 to 80.0°C Drying Time: 3 to 4.0hrs Drying Time (Cumulative): 8hrs Maximum Moisture Content: 0.04% Melt Temperature: 230 to 275.0°C Nozzle Temperature: 230 to 275.0°C Front - Zone 3 Temperature: 225 to 275.0°C Middle - Zone 2 Temperature: 215 to 260.0°C Rear - Zone 1 Temperature: 210 to 255.0°C Mold Temperature: 50 to 70.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Shot to Cylinder Size: 30 to 80.0% Vent Depth: 0.038 to 0.076mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.