Propiedades
General
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 8 - 10 % Show Supplier Material materials with Elongación of 8 - 10 % | SABIC - Japan Method | break |
Hardness, Rockwell R | 23.0 °C | 124 [-] Show Supplier Material materials with Hardness, Rockwell R of 124 [-] | ASTM D 785 |
Impact strength, Izod notched, ASTM | 23.0 °C | 107 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 107 J/m | ASTM D 256 | notched, 23°C |
Módulo de flexión | 23.0 °C | 5.6 GPa Show Supplier Material materials with Módulo de flexión of 5.6 GPa | ASTM D 790 |
Resistencia a la flexión | 23.0 °C | 142 MPa Show Supplier Material materials with Resistencia a la flexión of 142 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 98 MPa Show Supplier Material materials with Resistencia a la tracción of 98 MPa | SABIC - Japan Method | yield |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 107 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 107 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 2.8E-5 - 4.5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.8E-5 - 4.5E-5 1/K | TMA | -30°C to 30°C | ||
Heat deflection temperature, 1.80 MPa | 139 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 139 °C | ASTM D 648 | 6.4 mm, unannealed | |||
Relative temperature index, electrical | 65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C | UL 746B | |||
Relative temperature index, mechanical impact | 65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C | UL 746B | |||
Relative temperature index, mechanical strength | 65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C | UL 746B | |||
Temperatura de flexión bajo carga | 139 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 139 °C | ||||
Inflamabilidad | UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=237021- - | ||||
Eléctrico
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dielectric constant, 60Hz | 23.0 °C | 2.86 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.86 [-] | ASTM D 150 | 50/60 Hz |
High Amp Arc Ignition | 23.0 °C | 1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm | ≥, UL 746A | PLC 0 |
High Volt Arc Track Rate | 23.0 °C | 4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code | UL 746A | (PLC) |
Hot-Wire Ignition | 23.0 °C | 1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm | ≥, UL 746A | PLC 3 |
Sheet resistivity, ROA | 23.0 °C | 1.00E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+16 Ω | ASTM D 257 |
Índice de seguimiento comparativo | 23.0 °C | 3 V Show Supplier Material materials with Índice de seguimiento comparativo of 3 V | UL 746A | (UL) {PLC} |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.2 % Show Supplier Material materials with Contracción of 0.2 % | SABIC method | 3.2 mm |
Velocidad de flujo de la masa derretida | 11.1 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 11.1 g/10min | ASTM D 1238 | 300°C/5.0 kgf |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Electronic Components, Electrical, Plumbing | |
| Availability | Asia | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |