Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of friction | 0.27 - 0.36 [-] Show Supplier Material materials with Coefficient of friction of 0.27 - 0.36 [-] | ||
Coefficient of friction, kinetic | 0.36 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.36 [-] | ASTM D 3702 Modified: Manual | |
Coefficient of friction, static | 0.27 [-] Show Supplier Material materials with Coefficient of friction, static of 0.27 [-] | ASTM D 3702 Modified: Manual | |
Densidad | 23.0 °C | 1.41 g/cm³ Show Supplier Material materials with Densidad of 1.41 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 1.2 % Show Supplier Material materials with Elongación of 1.2 % | ISO 527 | break |
Impact strength, Izod notched, ASTM | 23.0 °C | 96 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 96 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 939 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 939 J/m | ASTM D 4812 | 23°C |
Módulo de flexión | 23.0 °C | 22.7 GPa Show Supplier Material materials with Módulo de flexión of 22.7 GPa | ISO 178 |
Módulo elástico | 23.0 °C | 20.1 GPa Show Supplier Material materials with Módulo elástico of 20.1 GPa | ASTM D 638 | 50 mm/min |
Resistencia a la flexión | 23.0 °C | 334 MPa Show Supplier Material materials with Resistencia a la flexión of 334 MPa | ISO 178 |
Resistencia a la tracción | 23.0 °C | 214 MPa Show Supplier Material materials with Resistencia a la tracción of 214 MPa | ISO 527 | break |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 8 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 8 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 39 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 39 kJ/m² | ISO 180/1U | unnotched 80*10*4 |
Aplicaciones térmicas
| Property | Value | Comment | |
|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 279 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 279 °C | ASTM D 648 | 3.2mm, unannealed | |
Temperatura de flexión bajo carga | 279 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 279 °C | ||
Inflamabilidad | UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101345286- - <br> UL Recognized, 94HB Flame Class Rating: 1.5mm UL 94 <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=101345253- - | ||
Eléctrico
| Property | Temperature | Value | Comment |
|---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 100 - 1000000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 100 - 1000000 Ω | ASTM D 257 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Lab Ware and Clinical Diagnostics, Medical Device | |
| Availability | Europe,Asia,Americas | |
| Processing methods | Drying Temperature: 120°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |