LNP™ COLORCOMP™ Compound D1000E

Want to keep this datasheet? Save it now in your required format

Description

LNP* COLORCOMP* D1000E is an unfilled general purpose Polycarbonate resin. Added feature of this grade is: Non-Halogenated.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Instrumental quirúrgico

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.35 % Show Supplier Material materials with Absorción de agua of 0.35 %	ASTM D 570 \| (23°C/Saturated)
Densidad	23.0 °C	1.19 g/cm³ Show Supplier Material materials with Densidad of 1.19 g/cm³	ASTM D 792
Densidad relativa	23.0 °C	1.2 [-] Show Supplier Material materials with Densidad relativa of 1.2 [-]	ASTM D 792 \|
Specific volume	23.0 °C	0.83 cm³/g Show Supplier Material materials with Specific volume of 0.83 cm³/g	ASTM D 792
Índice límite de óxigeno	23.0 °C	25 % Show Supplier Material materials with Índice límite de óxigeno of 25 %

Mecánica

Property	Temperature	Value	Comment
Dureza Rockwell M	23.0 °C	70 [-] Show Supplier Material materials with Dureza Rockwell M of 70 [-]	ASTM D 785 \|
Elongación	23.0 °C	130 % Show Supplier Material materials with Elongación of 130 %	ASTM D 638 \| brk, Type I, 50 mm/min
Hardness, Rockwell R	23.0 °C	118 [-] Show Supplier Material materials with Hardness, Rockwell R of 118 [-]	ASTM D 785
Impact strength, Izod notched, ASTM	23.0 °C	801 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 801 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	3204 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 3204 J/m	ASTM D 4812 \| 23°C
Instrumented Impact, at Peak	23.0 °C	63 J Show Supplier Material materials with Instrumented Impact, at Peak of 63 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.3 GPa Show Supplier Material materials with Módulo de flexión of 2.3 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Resistencia a la flexión	23.0 °C	96 MPa Show Supplier Material materials with Resistencia a la flexión of 96 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	68 MPa Show Supplier Material materials with Resistencia a la tracción of 68 MPa	ASTM D 638 \| brk, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	801 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 801 kJ/m²	ASTM D 256 \| notched, 23°C
Taber Abrasion	23.0 °C	10 mg/1000cy Show Supplier Material materials with Taber Abrasion of 10 mg/1000cy	ASTM D 1044 \| CS-17, 1 kg

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	1.25E-3 J/(kg·K) Show Supplier Material materials with Calor específico of 1.25E-3 J/(kg·K)	ASTM C 351
Coeficiente de dilatación térmica	23.0 °C	6.84E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.84E-5 1/K	ASTM E 831 \| -40°C to 95°C
Conductividad térmica	23.0 °C	0.27 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.27 W/(m·K)	ASTM C177
Heat deflection temperature, 0.45 MPa		137 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 137 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa		132 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 132 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical		130 °C Show Supplier Material materials with Relative temperature index, electrical of 130 °C	UL 746B
Relative temperature index, mechanical impact		130 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 130 °C	UL 746B
Relative temperature index, mechanical strength		130 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 130 °C	UL 746B
Temperatura de flexión bajo carga		132 - 137 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 132 - 137 °C
Temperatura de reblandecimiento Vicat		154 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 154 °C	ASTM D 1525 \| Rate B/50
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=103952911- - <br> UL Recognized, 94HB Flame Class Rating: ≥0.7mm UL 94 <br> Radiant Panel Listing: TRUE- UL Tested <br> UV-light, water exposure/immersion: F2- UL 746C <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=103938181- -

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	2.96 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.96 [-]	ASTM D 150
Dielectric constant, 60Hz	23.0 °C	3.17 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 3.17 [-]	ASTM D 150 \| 50/60 Hz
Dissipation factor, 1MHz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 0.01 [-]	ASTM D 150 \|
Dissipation factor, 50Hz	23.0 °C	9E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 9E-4 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 2
Rigidez dieléctrica	23.0 °C	14.9 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 14.9 kV/mm	ASTM D 149 \| in air, 3.2 mm
Volume resistivity	23.0 °C	1.00E+17 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+17 Ω·cm	ASTM D 257
Índice de seguimiento comparativo	23.0 °C	2 V Show Supplier Material materials with Índice de seguimiento comparativo of 2 V	UL 746A \| (UL) {PLC}

Óptico

Property	Value	Comment
Transmission	88 % Show Supplier Material materials with Transmission of 88 %	ASTM D 1003 \| 2.54 mm
Turbidez	1 % Show Supplier Material materials with Turbidez of 1 %	ASTM D 1003 \| 2.54 mm
Índice de refracción	1.59 [-] Show Supplier Material materials with Índice de refracción of 1.59 [-]	ASTM D542

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		10.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 10.5 g/10min	ASTM D 1238 \| 300°C/1.2 kgf

Technological properties

Property
Application areas	Surgical Devices
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120°C Drying Time: 3 to 4.0hrs Drying Time (Cumulative): 48hrs Maximum Moisture Content: 0.02% Melt Temperature: 295 to 315.0°C Nozzle Temperature: 290 to 310.0°C Front - Zone 3 Temperature: 295 to 315.0°C Middle - Zone 2 Temperature: 280 to 305.0°C Rear - Zone 1 Temperature: 270 to 295.0°C Mold Temperature: 70 to 95.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Shot to Cylinder Size: 40 to 60.0% Vent Depth: 0.025 to 0.076mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.