LNP™ LUBRICOMP™ Compound RFL26

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP* RFL26 is a compound based on Nylon 66 resin containing 30% Glass Fiber, 10% PTFE. Added features of this material include: Wear Resistant.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Coefficient of friction		0.61 [-] Show Supplier Material materials with Coefficient of friction of 0.61 [-]
Coefficient of friction, kinetic		0.61 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.61 [-]	ASTM D 3702 Modified: Manual
Densidad	23.0 °C	1.46 g/cm³ Show Supplier Material materials with Densidad of 1.46 g/cm³	ASTM D 792

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	3.3 % Show Supplier Material materials with Elongación of 3.3 %	ASTM D 638 \| break
Resistencia a la flexión	23.0 °C	262 MPa Show Supplier Material materials with Resistencia a la flexión of 262 MPa	ISO 178
Resistencia a la tracción	23.0 °C	185 MPa Show Supplier Material materials with Resistencia a la tracción of 185 MPa	ASTM D 638 \| break

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	3E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3E-5 1/K	ASTM E 831 \| -40°C to 40°C
Relative temperature index, electrical		65 °C Show Supplier Material materials with Relative temperature index, electrical of 65 °C	UL 746B
Relative temperature index, mechanical impact		65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	UL 746B
Relative temperature index, mechanical strength		65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	UL 746B
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101282712- - <br> UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94

Technological properties

Property
Application areas	Wireless Communications, Document Handling
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 80°C Drying Time: 4hrs Maximum Moisture Content: 0.15 to 0.25% Melt Temperature: 280 to 305.0°C Front - Zone 3 Temperature: 295 to 305.0°C Middle - Zone 2 Temperature: 280 to 295.0°C Rear - Zone 1 Temperature: 265 to 275.0°C Mold Temperature: 95 to 110.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.