LNP™ COLORCOMP™ Compound AX98567H

Want to keep this datasheet? Save it now in your required format

Description

LNP* COLORCOMP* AX98567H is an unfilled compound based on ABS. Added feature of this grade is: Healthcare.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Instrumental quirúrgico

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.06 [-] Show Supplier Material materials with Densidad relativa of 1.06 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2 % Show Supplier Material materials with Elongación of 2 %	ISO 527 \| yield, 5 mm/min
Módulo de flexión	23.0 °C	2.6 GPa Show Supplier Material materials with Módulo de flexión of 2.6 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	75 MPa Show Supplier Material materials with Resistencia a la flexión of 75 MPa	ISO 178
Resistencia a la tracción	23.0 °C	52 MPa Show Supplier Material materials with Resistencia a la tracción of 52 MPa	ISO 527 \| yield, 5 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	11 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 11 kJ/m²	ISO 179/2C \| 23°C
Resistencia al choque, ensayo Charpy no entallado	23.0 °C	70 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 70 kJ/m²	ISO 179/2C \| -30°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 12 kJ/m²	ISO 180/1A \| 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	8E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 8E-5 1/K	ISO 11359-2 \| 23°C to 60°C
Relative temperature index, electrical		80 °C Show Supplier Material materials with Relative temperature index, electrical of 80 °C	UL 746B
Relative temperature index, mechanical impact		80 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C	UL 746B
Relative temperature index, mechanical strength		80 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 80 °C	UL 746B
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101343432- - <br> UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	1 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 1 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 4
Sheet resistivity, ROA	23.0 °C	1.00E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+16 Ω	IEC 60093
Volume resistivity	23.0 °C	1.00E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+16 Ω·cm	IEC 60093

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.4 % Show Supplier Material materials with Contracción of 0.4 %	ISO 294 \| 24 hrs
Contracción transversal	23.0 °C	0.4 % Show Supplier Material materials with Contracción transversal of 0.4 %	ISO 294 \| 24 hrs
Velocidad de flujo del volumen derretido		27 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 27 cm³/10min	ISO 1133 \| MVR at 230°C/10.0 kg

Technological properties

Property
Application areas	Surgical Devices, Medical Device
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 80°C Drying Time: 4hrs Maximum Moisture Content: 0.05 to 0.1% Melt Temperature: 260°C Front - Zone 3 Temperature: 265 to 275.0°C Middle - Zone 2 Temperature: 230 to 245.0°C Rear - Zone 1 Temperature: 205 to 215.0°C Mold Temperature: 70 to 80.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.