LNP™ THERMOCOMP™ Compound DSL1120

Want to keep this datasheet? Save it now in your required format

Description

Glass beads filled FR

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Electrónica

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Módulo de flexión	23.0 °C	2.7 GPa Show Supplier Material materials with Módulo de flexión of 2.7 GPa	ASTM D 790
Resistencia a la flexión	23.0 °C	88 MPa Show Supplier Material materials with Resistencia a la flexión of 88 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span

Aplicaciones térmicas

Property	Temperature	Value	Comment
Contenido de cenizas	23.0 °C	19 % Show Supplier Material materials with Contenido de cenizas of 19 %	w/w
Heat deflection temperature, 1.80 MPa		133 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 133 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical		80 °C Show Supplier Material materials with Relative temperature index, electrical of 80 °C	UL 746B
Relative temperature index, mechanical impact		80 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C	UL 746B
Relative temperature index, mechanical strength		80 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 80 °C	UL 746B
Temperatura de flexión bajo carga		133 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 133 °C
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=228416- - <br> UL Recognized, 94V-0 Flame Class Rating: ≥3mm UL 94 <br> UL Recognized, 94V-1 Flame Class Rating: ≥1.5mm UL 94

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	9.6 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 9.6 g/10min	ASTM D 1238 \| 300°C/1.2 kgf

Technological properties

Property
Application areas	Electrical
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120°C Drying Time: 3 to 4.0hrs Melt Temperature: 290 to 310.0°C Nozzle Temperature: 280 to 305.0°C Front - Zone 3 Temperature: 290 to 310.0°C Middle - Zone 2 Temperature: 275 to 300.0°C Rear - Zone 1 Temperature: 265 to 290.0°C Mold Temperature: 70 to 95.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.