Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.08 g/cm³ Show Supplier Material materials with Densidad of 1.08 g/cm³ | ISO 1183 |
Densidad relativa | 23.0 °C | 1.07 [-] Show Supplier Material materials with Densidad relativa of 1.07 [-] | ASTM D 792 | |
Moisture absorption | 23.0 °C | 1 % Show Supplier Material materials with Moisture absorption of 1 % | ISO 62 | (23°C / 50% RH) |
Mecánica
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Elongación | 23.0 °C | 146.7 % Show Supplier Material materials with Elongación of 146.7 % | ISO 527 | yield, 5 mm/min | ||
Instrumented Impact, Total Energy | 23.0 °C | 49 J Show Supplier Material materials with Instrumented Impact, Total Energy of 49 J | ASTM D 3763 | 23°C | ||
Módulo de flexión | 23.0 °C | 1.7 GPa Show Supplier Material materials with Módulo de flexión of 1.7 GPa | ISO 178 | ||
Módulo elástico | 23.0 °C | 1.7 GPa Show Supplier Material materials with Módulo elástico of 1.7 GPa | ISO 527 | 1 mm/min | ||
Resistencia a la flexión | 23.0 °C | 53 MPa Show Supplier Material materials with Resistencia a la flexión of 53 MPa | ISO 178 | ||
Resistencia a la tracción | 23.0 °C | 41 MPa Show Supplier Material materials with Resistencia a la tracción of 41 MPa | ISO 527 | break, 5 mm/min | ||
Impact strength, Izod unnotched, ASTM | ASTM D 4812 | 23°C | ||||
Resistencia al choque, ensayo Izod no entallado | ISO 180/1U | 80*10*4, 23°C | ||||
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 1.34E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.34E-4 1/K | ISO 11359-2 | -40°C to 40°C |
Coeficiente de dilatación térmica transversal | 23.0 °C | 1.34E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 1.34E-4 1/K | ISO 11359-2 | -40°C to 40°C |
Heat deflection temperature, 0.45 MPa | 150 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 150 °C | ISO 75/Bf | Flatw 80*10*4 sp=64mm | |
Heat deflection temperature, 1.80 MPa | 147 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 147 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |
Temperatura de flexión bajo carga | 147 - 150 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 147 - 150 °C |
Rheological Properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | Enclosure/Housing/Cover, Enclosures | |
| Availability | Europe,Asia,Americas | |
| Processing methods | Drying Temperature: 80°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |