LNP™ COLORCOMP™ Compound I1000

Want to keep this datasheet? Save it now in your required format

Description

LNP COLORCOMP I1000 is an unfilled Nylon 6/12

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.06 [-] Show Supplier Material materials with Densidad relativa of 1.06 [-]	ASTM D 792 \|
Índice límite de óxigeno	23.0 °C	27 % Show Supplier Material materials with Índice límite de óxigeno of 27 %

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	4.5 % Show Supplier Material materials with Elongación of 4.5 %	ISO 527 \| yield, 5 mm/min
Módulo elástico	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo elástico of 2.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la tracción	23.0 °C	62 MPa Show Supplier Material materials with Resistencia a la tracción of 62 MPa	ISO 527 \| yield, 5 mm/min

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	135 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 135 °C	ISO 75/Bf \| Flatw 80104 sp=64mm
Heat deflection temperature, 1.80 MPa	62 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 62 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga	62 - 135 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 62 - 135 °C

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	3.2 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 3.2 [-]	ASTM D 150
Constante dieléctrica, 100 Hz	23.0 °C	3.6 [-] Show Supplier Material materials with Constante dieléctrica, 100 Hz of 3.6 [-]	ASTM D 150
Dissipation factor, 100Hz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 100Hz of 0.02 [-]	ASTM D 150
Dissipation factor, 100kHz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 100kHz of 0.01 [-]	ASTM D 150
Dissipation factor, 1kHz	23.0 °C	0.02 [-] Show Supplier Material materials with Dissipation factor, 1kHz of 0.02 [-]	ASTM D 150
Sheet resistivity, ROA	23.0 °C	1.00E+12 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+12 Ω	ASTM D 257
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	1 % Show Supplier Material materials with Contracción of 1 %	ASTM D 955 \| 24 hrs
Contracción transversal	23.0 °C	1 % Show Supplier Material materials with Contracción transversal of 1 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 80°C Drying Time: 4hrs Maximum Moisture Content: 0.12 to 0.2% Melt Temperature: 270 to 275.0°C Front - Zone 3 Temperature: 270 to 280.0°C Middle - Zone 2 Temperature: 260 to 270.0°C Rear - Zone 1 Temperature: 255 to 265.0°C Mold Temperature: 65 to 95.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.