LNP™ THERMOCOMP™ Compound OF008G

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP OF008G is a compound based on PPS - Linear containing 15% Glass Fiber, 25% Milled Glass.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Fabricación

Fabricación de aditivos

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	1.9 % Show Supplier Material materials with Elongación of 1.9 %	ASTM D 638 \| brk, Type I, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	68 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 68 J/m	ASTM D 256
Impact strength, Izod unnotched, ASTM	23.0 °C	395 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 395 J/m	ASTM D 4812 \| 23°C
Módulo de flexión	23.0 °C	9.3 GPa Show Supplier Material materials with Módulo de flexión of 9.3 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Módulo elástico	23.0 °C	8.8 GPa Show Supplier Material materials with Módulo elástico of 8.8 GPa	ASTM D 638 \| 5 mm/min
Resistencia a la flexión	23.0 °C	157 MPa Show Supplier Material materials with Resistencia a la flexión of 157 MPa	ASTM D 790 \| brk, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	104 MPa Show Supplier Material materials with Resistencia a la tracción of 104 MPa	ASTM D 638 \| brk, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	68 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 68 kJ/m²	ASTM D 256 \| notched, 23°C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.2 % Show Supplier Material materials with Contracción of 0.2 %	ASTM D 955 \| 24 hrs
Contracción transversal	23.0 °C	0.8 % Show Supplier Material materials with Contracción transversal of 0.8 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Application areas	Fused Deposition Modeling (FDM)
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 120 to 150.0°C Drying Time: 4hrs Melt Temperature: 315 to 320.0°C Front - Zone 3 Temperature: 330 to 345.0°C Middle - Zone 2 Temperature: 320 to 330.0°C Rear - Zone 1 Temperature: 305 to 315.0°C Mold Temperature: 140 to 165.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.