General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad | 23.0 °C | 1.54 g/cm³ Show Supplier Material materials with Densidad of 1.54 g/cm³ | ISO 1183 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 2.8 % Show Supplier Material materials with Elongación of 2.8 % | ISO 527 | break, 5 mm/min |
Módulo de flexión | 23.0 °C | 16.9 GPa Show Supplier Material materials with Módulo de flexión of 16.9 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 18.9 GPa Show Supplier Material materials with Módulo elástico of 18.9 GPa | ISO 527 | 1 mm/min |
Resistencia a la flexión | 23.0 °C | 334 MPa Show Supplier Material materials with Resistencia a la flexión of 334 MPa | ISO 178 | yield, 2 mm/min |
Resistencia a la tracción | 23.0 °C | 230 MPa Show Supplier Material materials with Resistencia a la tracción of 230 MPa | ISO 527 | yield, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 14 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 14 kJ/m² | ISO 180/1A | 80*10*4, 23°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 93 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 93 kJ/m² | ISO 180/1U | unnotched 80*10*4, 23°C |
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 1.00E+5 - 1.00E+7 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+5 - 1.00E+7 Ω | ASTM D 257 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Contracción | 23.0 °C | 0.2 % Show Supplier Material materials with Contracción of 0.2 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | LED Lighting, Electronic Components | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 120°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |