Propiedades
General
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 3 - 4 % Show Supplier Material materials with Elongación of 3 - 4 % | ASTM D 638 | brk, Type I, 5 mm/min |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 267 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 267 J/m | ASTM D 4812 | 23°C |
Módulo de flexión | 23.0 °C | 7.9 GPa Show Supplier Material materials with Módulo de flexión of 7.9 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span |
Resistencia a la flexión | 23.0 °C | 172 MPa Show Supplier Material materials with Resistencia a la flexión of 172 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Resistencia a la tracción | 23.0 °C | 127 MPa Show Supplier Material materials with Resistencia a la tracción of 127 MPa | ASTM D 638 | brk, Type I, 5 mm/min |
Aplicaciones térmicas
Technological properties
| Property | ||
|---|---|---|
| Application areas | Electronic Components | |
| Availability | Europe,Asia,Americas | |
| Processing methods | Drying Temperature: 100 to 120.0°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |