ULTEM™ Resin HU1000 - Americas

Want to keep this datasheet? Save it now in your required format

Description

Transparent, standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Instrumental quirúrgico

Ophthalmics

Medical Equipment General

Industria farmacéutica

Bienes de consumo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	1.25 % Show Supplier Material materials with Absorción de agua of 1.25 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.27 g/cm³ Show Supplier Material materials with Densidad of 1.27 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.27 [-] Show Supplier Material materials with Densidad relativa of 1.27 [-]	ASTM D 792 \|
Moisture absorption	23.0 °C	0.7 % Show Supplier Material materials with Moisture absorption of 0.7 %	ISO 62 \| (23°C / 50% RH)
Índice límite de óxigeno	23.0 °C	47 % Show Supplier Material materials with Índice límite de óxigeno of 47 %

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	60 % Show Supplier Material materials with Elongación of 60 %	ISO 527 \| break, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	53 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 53 J/m	ASTM D 256
Impact strength, Izod unnotched, ASTM	23.0 °C	1335 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 1335 J/m	ASTM D 4812 \| 23°C
Módulo de flexión	23.0 °C	3.3 GPa Show Supplier Material materials with Módulo de flexión of 3.3 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	3.2 GPa Show Supplier Material materials with Módulo elástico of 3.2 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	160 MPa Show Supplier Material materials with Resistencia a la flexión of 160 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa	ISO 527 \| yield, 5 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	4 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 4 kJ/m²	ISO 179/1eA \| V-notch Edgew 80104 sp=62mm, 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	6 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 6 kJ/m²	ISO 180/1A \| notched 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 5E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Heat deflection temperature, 1.80 MPa		215 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 215 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Relative temperature index, electrical		170 °C Show Supplier Material materials with Relative temperature index, electrical of 170 °C	UL 746B
Relative temperature index, mechanical impact		170 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 170 °C	UL 746B
Relative temperature index, mechanical strength		170 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 170 °C	UL 746B
Temperatura de flexión bajo carga		215 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 215 °C
Temperatura de reblandecimiento Vicat		215 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 215 °C	ISO 306 \| Rate B/50
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100044765- - <br> UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥0.75mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> NBS Smoke Density, Flaming, Ds 4 min: 0.7- ASTM E 662

Eléctrico

Property	Temperature	Value	Comment
Dissipation factor, 1kHz	23.0 °C	1.3E-3 [-] Show Supplier Material materials with Dissipation factor, 1kHz of 1.3E-3 [-]	ASTM D 150
Factor de disipación	23.0 °C	2.5E-3 [-] Show Supplier Material materials with Factor de disipación of 2.5E-3 [-]	ASTM D 150 \| 2450 MHz
High Amp Arc Ignition	23.0 °C	0.75 mm Show Supplier Material materials with High Amp Arc Ignition of 0.75 mm	≥, UL 746A \| PLC 4
High Volt Arc Track Rate	23.0 °C	2 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 2 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0.75 mm Show Supplier Material materials with Hot-Wire Ignition of 0.75 mm	≥, UL 746A \| PLC 2
Rigidez dieléctrica	23.0 °C	32.7 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 32.7 kV/mm	ASTM D 149 \| in air, 1.6 mm
Volume resistivity	23.0 °C	1.00E+17 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+17 Ω·cm	ASTM D 257
Índice de seguimiento comparativo	23.0 °C	4 V Show Supplier Material materials with Índice de seguimiento comparativo of 4 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		9 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 9 g/10min	ASTM D 1238 \| 337°C/6.6 kgf
Velocidad de flujo del volumen derretido		13 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 13 cm³/10min	ISO 1133 \| MVR at 220°C/5.0 kg

Technological properties

Property
Application areas	Fluid Delivery, Lab Ware and Clinical Diagnostics, Electronic Components, Animal Testing, Surgical Tray, Pharmaceutical Manufacturing, Pharmaceutical Packaging & Drug Delivery, Surgical Devices, Respiratory, Renal and Blood Handling, Oil/Gas, Medical Facility Infrastructure, Monitoring and Imaging, LED Lighting, Medical Device
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 150°C Drying Time: 4 to 6.0hrs Drying Time (Cumulative): 24hrs Maximum Moisture Content: 0.02% Melt Temperature: 350 to 400.0°C Nozzle Temperature: 345 to 400.0°C Front - Zone 3 Temperature: 345 to 400.0°C Middle - Zone 2 Temperature: 340 to 400.0°C Rear - Zone 1 Temperature: 330 to 400.0°C Mold Temperature: 135 to 165.0°C Back Pressure: 0.3 to 0.7MPa Screw Speed: 40 to 70.0rpm Shot to Cylinder Size: 40 to 60.0% Vent Depth: 0.025 to 0.076mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.