NORYL™ Resin BN31 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ BN31 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This blow moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL BN31 resin exhibit good low temperature impact strength, heat resistance, excellent processability, Low warpage, and dimensional stability. The material is an excellent candidate for blow molded applications such as hospital bed headboard, cladding, tray.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad relativa	23.0 °C	1.1 [-] Show Supplier Material materials with Densidad relativa of 1.1 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Gardner Impact	23.0 °C	33 J Show Supplier Material materials with Gardner Impact of 33 J	ASTM D 3029 \| -40°C
Impact strength, Izod notched, ASTM	23.0 °C	267 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 267 J/m	ASTM D 256
Módulo de flexión	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Resistencia a la flexión	23.0 °C	72 MPa Show Supplier Material materials with Resistencia a la flexión of 72 MPa	ASTM D 790 \| brk, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	48 MPa Show Supplier Material materials with Resistencia a la tracción of 48 MPa	ASTM D 638 \| yld, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	267 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 267 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	82 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 82 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	95 °C Show Supplier Material materials with Relative temperature index, electrical of 95 °C	UL 746B
Relative temperature index, mechanical impact	80 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 80 °C	UL 746B
Relative temperature index, mechanical strength	95 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 95 °C	UL 746B
Temperatura de flexión bajo carga	82 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 82 °C
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221152- - <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	3 mm Show Supplier Material materials with High Amp Arc Ignition of 3 mm	≥, UL 746A \| PLC 2
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	3 mm Show Supplier Material materials with Hot-Wire Ignition of 3 mm	≥, UL 746A \| PLC 2

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.6 % Show Supplier Material materials with Contracción of 0.6 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Medical Facility Infrastructure
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 95°C Drying Time: 2 to 4.0hrs Melt Temperature (Parison): 210 to 215.0°C Barrel - Zone 1 Temperature: 205 to 215.0°C Barrel - Zone 2 Temperature: 205 to 215.0°C Barrel - Zone 3 Temperature: 205 to 215.0°C Barrel - Zone 4 Temperature: 210 to 215.0°C Adapter - Zone 5 Temperature: 210 to 215.0°C Head - Zone 6 - Top Temperature: 210 to 215.0°C Head - Zone 7 - Bottom Temperature: 215 to 220.0°C Mold Temperature: 50 to 70.0°C Die Temperature: 215 to 220.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.