General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad relativa | 23.0 °C | 1.19 [-] Show Supplier Material materials with Densidad relativa of 1.19 [-] | ASTM D 792 | |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 7.7 % Show Supplier Material materials with Elongación of 7.7 % | ASTM D 638 | brk, Type I, 5 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 165 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 165 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 827 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 827 J/m | ASTM D 4812 | 23°C |
Instrumented Impact, Total Energy | 23.0 °C | 19 J Show Supplier Material materials with Instrumented Impact, Total Energy of 19 J | ASTM D 3763 | 23°C |
Módulo de flexión | 23.0 °C | 5.6 GPa Show Supplier Material materials with Módulo de flexión of 5.6 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span |
Resistencia a la flexión | 23.0 °C | 129 MPa Show Supplier Material materials with Resistencia a la flexión of 129 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Resistencia a la tracción | 23.0 °C | 79 MPa Show Supplier Material materials with Resistencia a la tracción of 79 MPa | ASTM D 638 | yld, Type I, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 165 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 165 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 1.44E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.44E-5 1/K | ASTM E 831 | -40°C to 40°C | ||
Coeficiente de dilatación térmica transversal | 23.0 °C | 7.74E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.74E-5 1/K | ASTM E 831 | -40°C to 40°C | ||
Heat deflection temperature, 0.45 MPa | 155 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 155 °C | ASTM D 648 | 3.2 mm, unannealed | |||
Heat deflection temperature, 1.80 MPa | 133 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 133 °C | ASTM D 648 | 3.2mm, unannealed | |||
Temperatura de flexión bajo carga | 133 - 155 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 133 - 155 °C | ||||
Temperatura de reblandecimiento Vicat | 162 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 162 °C | ASTM D 1525 | Rate B/50 | |||
Inflamabilidad | UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221227- - <br> UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Contracción | 23.0 °C | 0.2 % Show Supplier Material materials with Contracción of 0.2 % | SABIC method | 3.2 mm |
Contracción transversal | 23.0 °C | 0.25 % Show Supplier Material materials with Contracción transversal of 0.25 % | SABIC method | 3.2 mm |
Velocidad de flujo de la masa derretida | 2.6 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 2.6 g/10min | ASTM D 1238 | 260°C/5.0 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Pipe/Fitting | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 65 to 75.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |