NORYL PPX™ Resin PPX630 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL PPX™ 630 resin is a 30% glass reinforced alloy of polyphenylene ether (PPE) + polypropylene (PP). This injection moldable grade exhibits high elongation and high stiffness along with temperature performance, impact resistance, hydrolytic and dimensional stability. NORYL PPX630 resin is an excellent candidate for hot water system exteriors, condensate housings, and printer internals. *See NORYL PPX630F resin for NSF 61.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Construcción

Water Management

Defensa

Bienes de consumo

Electrodomésticos para el hogar

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	7.7 % Show Supplier Material materials with Elongación of 7.7 %	ASTM D 638 \| brk, Type I, 5 mm/min
Módulo de flexión	23.0 °C	5.6 GPa Show Supplier Material materials with Módulo de flexión of 5.6 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Resistencia a la flexión	23.0 °C	129 MPa Show Supplier Material materials with Resistencia a la flexión of 129 MPa	ASTM D 790 \| brk, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	79 MPa Show Supplier Material materials with Resistencia a la tracción of 79 MPa	ASTM D 638 \| yld, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	165 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 165 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	1.44E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.44E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	7.74E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.74E-5 1/K	ASTM E 831 \| -40°C to 40°C
Heat deflection temperature, 0.45 MPa		155 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 155 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		133 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 133 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga		133 - 155 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 133 - 155 °C
Temperatura de reblandecimiento Vicat		162 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 162 °C	ASTM D 1525 \| Rate B/50

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.2 % Show Supplier Material materials with Contracción of 0.2 %	SABIC method \| on tensile bar
Contracción transversal	23.0 °C	0.25 % Show Supplier Material materials with Contracción transversal of 0.25 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Power Boat, Weapon, Water Treatment/Filtration, Vacuum Cleaner, Furnace/Heater, Hot Water System, Enclosures, Electronic Components, Document Handling
Availability	Europe,Asia,Americas
Processing methods	Middle - Zone 2 Temperature: 250 to 290.0°C Shot to Cylinder Size: 30 to 70.0% Drying Temperature: 65 to 75.0°C Vent Depth: 0.051 to 0.076mm Back Pressure: 0.3 to 0.7MPa Nozzle Temperature: 260 to 300.0°C Mold Temperature: 40 to 65.0°C Drying Time: 2 to 4.0hrs Drying Time (Cumulative): 8hrs Melt Temperature: 260 to 300.0°C Maximum Moisture Content: 0.02% Screw Speed: 20 to 100.0rpm Rear - Zone 1 Temperature: 245 to 290.0°C Front - Zone 3 Temperature: 255 to 295.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.