NORYL™ Resin GFN1F - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ GFN1F resin is a 10% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN1F carries a UL746C outdoor suitability rating of F1 along with FDA food contact compliance and NSF 61 listings in several colors. The properties of this material makes it an excellent candidate for water management applications such as water filter and meter components, pump housings / impellers, shower + faucet, and valves.*See NORYL GFN1 resin for NON FDA / NSF version.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.06 % Show Supplier Material materials with Absorción de agua of 0.06 %	ASTM D 570 \| (23°C/24hrs)
Densidad relativa	23.0 °C	1.13 [-] Show Supplier Material materials with Densidad relativa of 1.13 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	4.5 % Show Supplier Material materials with Elongación of 4.5 %	ISO 527 \| break, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	80 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 80 J/m	ASTM D 256
Impact strength, Izod unnotched, ASTM	23.0 °C	410 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 410 J/m	ASTM D 4812 \| 23°C
Instrumented Impact, Total Energy	23.0 °C	20 J Show Supplier Material materials with Instrumented Impact, Total Energy of 20 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	4.2 GPa Show Supplier Material materials with Módulo de flexión of 4.2 GPa	ISO 178
Módulo elástico	23.0 °C	4.4 GPa Show Supplier Material materials with Módulo elástico of 4.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	122 MPa Show Supplier Material materials with Resistencia a la flexión of 122 MPa	ISO 178
Resistencia a la tracción	23.0 °C	60 MPa Show Supplier Material materials with Resistencia a la tracción of 60 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	8 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 8 kJ/m²	ISO 179/1eA \| V-notch Edgew 80104 sp=62mm, 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	25 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 25 kJ/m²	ISO 180/1U \| unnotched 80104, -30°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	5.12E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5.12E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	7.14E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.14E-5 1/K	ASTM E 831 \| -40°C to 40°C
Heat deflection temperature, 0.45 MPa		135 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 135 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		124 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 124 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		90 °C Show Supplier Material materials with Relative temperature index, electrical of 90 °C	UL 746B
Relative temperature index, mechanical impact		90 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 90 °C	UL 746B
Relative temperature index, mechanical strength		90 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 90 °C	UL 746B
Temperatura de flexión bajo carga		124 - 135 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 124 - 135 °C
Temperatura de reblandecimiento Vicat		134 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 134 °C	ISO 306 \| Rate B/120
Inflamabilidad	UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221234- -

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 4
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	1.5 mm Show Supplier Material materials with Hot-Wire Ignition of 1.5 mm	≥, UL 746A \| PLC 1

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.55 % Show Supplier Material materials with Contracción of 0.55 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		4 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 4 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Velocidad de flujo del volumen derretido		16 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 16 cm³/10min	ISO 1133 \| MVR at 300°C/5.0 kg

Technological properties

Property
Application areas	Hot Water System, Plumbing, Water Treatment/Filtration
Availability	Asia,Americas
Processing methods	Nozzle Temperature: 295 to 315.0°C Shot to Cylinder Size: 30 to 70.0% Screw Speed: 20 to 100.0rpm Drying Time: 3 to 4.0hrs Middle - Zone 2 Temperature: 270 to 310.0°C Drying Temperature: 105 to 110.0°C Drying Time (Cumulative): 8hrs Rear - Zone 1 Temperature: 260 to 305.0°C Mold Temperature: 75 to 105.0°C Back Pressure: 0.3 to 0.7MPa Melt Temperature: 295 to 315.0°C Front - Zone 3 Temperature: 280 to 315.0°C Maximum Moisture Content: 0.02%
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.