SILTEM™ resin STM1700 - Europe

Want to keep this datasheet? Save it now in your required format

Description

SILTEM™ STM1700 resin is a flexible polyetherimide(PEI)-siloxane copolymer designed for wire and cable applications. It offers a halogen free (according VDE 0472) flame retardant solution that also offers low smoke emission and toxicity. It is an amber colored transparent material that can be selfcolored and easily processed on conventional equipment. The material may also have a fit in flexible profiles or injection molded parts.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Sistemas mecánicos

Maquinaria industrial

Energía

Energía nuclear

Ingeniería eléctrica

Electrónica

Ferrocarriles

Aeroespacial

Materiales aeroespaciales

Aircraft Interiors

Defensa

Mostrar todo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.76 % Show Supplier Material materials with Absorción de agua of 0.76 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.2 g/cm³ Show Supplier Material materials with Densidad of 1.2 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.2 [-] Show Supplier Material materials with Densidad relativa of 1.2 [-]	ASTM D 792 \|
Índice límite de óxigeno	23.0 °C	48 % Show Supplier Material materials with Índice límite de óxigeno of 48 %

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	80 [-] Show Supplier Material materials with Dureza Shore D of 80 [-]	ASTM D 2240
Elongación	23.0 °C	5 % Show Supplier Material materials with Elongación of 5 %	ISO 527 \| yield, 50 mm/min
Módulo de flexión	23.0 °C	2 GPa Show Supplier Material materials with Módulo de flexión of 2 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.3 GPa Show Supplier Material materials with Módulo elástico of 2.3 GPa	ISO 527 \| 1 mm/min
Resistencia a desgarros	23.0 °C	37 kN/m Show Supplier Material materials with Resistencia a desgarros of 37 kN/m	ISO 34 (Method A) \| @ 1.6mm
Resistencia a la flexión	23.0 °C	98 MPa Show Supplier Material materials with Resistencia a la flexión of 98 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	68 MPa Show Supplier Material materials with Resistencia a la tracción of 68 MPa	ISO 527 \| yield, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	8 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 8 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Taber Abrasion	23.0 °C	50 mg/1000cy Show Supplier Material materials with Taber Abrasion of 50 mg/1000cy	ASTM D 1044 \| CS-17, 1 kg

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	164 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 164 °C	ISO 75/Bf \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga	164 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 164 °C
Temperatura de reblandecimiento Vicat	180 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 180 °C	ISO 306 \| Rate B/120
Temperatura de transición del vidrio	200 °C Show Supplier Material materials with Temperatura de transición del vidrio of 200 °C	DMA \| matrix
Inflamabilidad	UL Compliant, 94V-0 Flame Class Rating: 1.6mm UL 94 by SABIC-IP

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	3.04 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 3.04 [-]	ASTM D 150
Constante dieléctrica, 100 Hz	23.0 °C	3.13 [-] Show Supplier Material materials with Constante dieléctrica, 100 Hz of 3.13 [-]	ASTM D 150
Dielectric constant, 1KHz	23.0 °C	3 [-] Show Supplier Material materials with Dielectric constant, 1KHz of 3 [-]	ASTM D 150
Dissipation factor, 100Hz	23.0 °C	0.01 [-] Show Supplier Material materials with Dissipation factor, 100Hz of 0.01 [-]	ASTM D 150
Dissipation factor, 100kHz	23.0 °C	6.1E-3 [-] Show Supplier Material materials with Dissipation factor, 100kHz of 6.1E-3 [-]	ASTM D 150
Dissipation factor, 1MHz	23.0 °C	5.4E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 5.4E-3 [-]	ASTM D 150
Rigidez dieléctrica	23.0 °C	16.7 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 16.7 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Sheet resistivity, ROA	23.0 °C	1.00E+15 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω	>, ASTM D 257
Volume resistivity	23.0 °C	1.00E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+16 Ω·cm	>, ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.87 % Show Supplier Material materials with Contracción of 0.87 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		7 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 7 g/10min	ASTM D 1238 \| 295°C/6.6 kgf

Technological properties

Property
Application areas	Document Handling, Composite, Adhesives
Availability	Europe,Americas
Processing methods	Maximum Moisture Content: 0.02% Rear - Zone 1 Temperature: 320 to 330.0°C Drying Time (Cumulative): 8hrs Die Temperature: 330 to 360.0°C Nozzle Temperature: 320 to 330.0°C Screw Speed: 50 to 100.0rpm Conductor Pre-heat Temperature: 100 to 150.0°C Drying Time: 4 to 6.0hrs Middle Zone Temperatures: 320 to 350.0°C Melt Temperature: 320 to 330.0°C Mold Temperature: 110 to 120.0°C Middle - Zone 2 Temperature: 320 to 330.0°C Drying Temperature: 105°C Shot to Cylinder Size: 40 to 60.0% Drying Temperature: 110 to 130.0°C Melt Temperature: 330 to 360.0°C Maximum Moisture Content: 0.02% Water Bath Temperature: 70 to 90.0°C Screw Speed: 5 to 50.0rpm Neck Temperature: 330 to 360.0°C Front - Zone 3 Temperature: 320 to 330.0°C Head Zone Temperature: 330 to 360.0°C Vent Depth: 0.025 to 0.076mm Back Pressure: 0.3 to 0.7MPa Screen Pack: 100 to 200.0- Cross-head Temperature: 330 to 360.0°C Feed Zone Temperature: 310 to 340.0°C Drying Time: 4 to 6.0hrs Compression Ratio: 2.1:1 to 2.7:1- Extruder Length/Diameter Ratio (L/D): 22:1 to 28:1-
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.