Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.56 g/cm³ Show Supplier Material materials with Densidad of 1.56 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 2.3 % Show Supplier Material materials with Elongación of 2.3 % | ASTM D 638 | break |
Módulo de flexión | 23.0 °C | 8.2 GPa Show Supplier Material materials with Módulo de flexión of 8.2 GPa | ASTM D 790 |
Resistencia a la flexión | 23.0 °C | 186 MPa Show Supplier Material materials with Resistencia a la flexión of 186 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 108 MPa Show Supplier Material materials with Resistencia a la tracción of 108 MPa | ASTM D 638 | break |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 64 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 64 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
Technological properties
| Property | ||
|---|---|---|
| Application areas | Others, Building Element, Non-LED Lighting | |
| Availability | Europe,Americas | |
| Processing methods | Mold Temperature: 80 to 110.0°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |