NORYL™ Resin GFN20 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ GFN20 resin is a 20% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN20 carries a UL746C outdoor suitability rating of F1 and is an excellent candidate for a variety of indoor and outdoor applications including construction, electrical components + displays, lawn and garden equipment. *See NORYL GFN20F resin for FDA food compliant / NSF version.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Absorción de agua

23.0 °C

0.2 %

Show Supplier Material materials with Absorción de agua of 0.2 %

ISO 62-1 | (23°C/saturated)

Moisture absorption

23.0 °C

0.06 %

Show Supplier Material materials with Moisture absorption of 0.06 %

ISO 62 | (23°C / 50% RH)

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

6 %

Show Supplier Material materials with Elongación of 6 %

SABIC - Japan Method | yld, Type I, 10 mm/min

Módulo de flexión

23.0 °C

5.4 GPa

Show Supplier Material materials with Módulo de flexión of 5.4 GPa

ISO 178 | 2 mm/min

Módulo elástico

23.0 °C

6 GPa

Show Supplier Material materials with Módulo elástico of 6 GPa

ISO 527 | 1 mm/min

Resistencia a la flexión

23.0 °C

150 MPa

Show Supplier Material materials with Resistencia a la flexión of 150 MPa

ISO 178 | yield, 2 mm/min

Resistencia a la tracción

23.0 °C

88 MPa

Show Supplier Material materials with Resistencia a la tracción of 88 MPa

SABIC - Japan Method | yld, Type I, 10 mm/min

Resistencia al choque, ensayo Izod no entallado

23.0 °C

30 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 30 kJ/m²

ISO 180/1U | 80*10*4, 23°C

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

2.8E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.8E-5 1/K

TMA | -30°C to 30°C

Heat deflection temperature, 1.80 MPa

135 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 135 °C

ISO 75/Af | Flatw 80*10*4 sp=64mm

Relative temperature index, electrical

90 °C

Show Supplier Material materials with Relative temperature index, electrical of 90 °C

UL 746B

Relative temperature index, mechanical impact

90 °C

Show Supplier Material materials with Relative temperature index, mechanical impact of 90 °C

UL 746B

Relative temperature index, mechanical strength

90 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 90 °C

UL 746B

Temperatura de flexión bajo carga

135 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 135 °C

Temperatura de reblandecimiento Vicat

147 °C

Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 147 °C

ISO 306 | Rate B/120

Inflamabilidad

UL Recognized, 94HB Flame Class Rating: 1.5mm UL 94 <br> Glow Wire Flammability Index 750°C, passes at: 3.2mm IEC 60695-2-12 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100092385- -

Eléctrico

PropertyTemperatureValueComment

Índice de seguimiento comparativo

23.0 °C

4 V

Show Supplier Material materials with Índice de seguimiento comparativo of 4 V

UL 746A | (UL) {PLC}

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.2 %

Show Supplier Material materials with Contracción of 0.2 %

SABIC method | on tensile bar

Velocidad de flujo del volumen derretido

15 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 15 cm³/10min

ISO 1133 | MVR at 280°C/10.0 kg

Technological properties

Property
Application areas

Wire & cable

Availability

Europe,Asia

Processing methods

Drying Temperature: 100 to 120.0°C
Drying Time: 2 to 3.0hrs
Melt Temperature: 280 to 300.0°C
Nozzle Temperature: 260 to 280.0°C
Front - Zone 3 Temperature: 280 to 300.0°C
Middle - Zone 2 Temperature: 260 to 280.0°C
Rear - Zone 1 Temperature: 240 to 260.0°C
Hopper Temperature: 60 to 80.0°C
Mold Temperature: 80 to 120.0°C

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.