LEXAN™ Copolymer LUX9130T - Asia

Want to keep this datasheet? Save it now in your required format

Description

LUX9130T Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.5 mm / 5VA rating at 6.0mm and is UV stabilized providing additional weathering capability. LUX9130T is high transparency, extremly low haze and bubble free for thick part molding.LUX9130T is available in clear transparent and tinted color options that is an excellent candidate for a wide variety of applications.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Ingeniería eléctrica

Electrónica

Pantallas

Construcción

Iluminación

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.1 % Show Supplier Material materials with Absorción de agua of 0.1 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.2 g/cm³ Show Supplier Material materials with Densidad of 1.2 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.19 [-] Show Supplier Material materials with Densidad relativa of 1.19 [-]	ASTM D 792
Moisture absorption	23.0 °C	0.01 % Show Supplier Material materials with Moisture absorption of 0.01 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6 % Show Supplier Material materials with Elongación of 6 %	ISO 527 \| yield, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	100 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 100 J/m	ASTM D 256
Instrumented Impact, Total Energy	23.0 °C	55 J Show Supplier Material materials with Instrumented Impact, Total Energy of 55 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo elástico of 2.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	98 MPa Show Supplier Material materials with Resistencia a la flexión of 98 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	64 MPa Show Supplier Material materials with Resistencia a la tracción of 64 MPa	ISO 527 \| yield, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	ISO 179/1eA \| V-notch Edgew 80103 sp=62mm, 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m²	ISO 180/1A \| 80103, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	130 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 130 kJ/m²	ISO 180/1U \| 80103, -30°C
Impact strength, Izod unnotched, ASTM	ASTM D 4812 \| -30°C
Resistencia al choque, ensayo Charpy no entallado	ISO 179/1eU \| Unnotch Edgew 80103 sp=62mm, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Ball Pressure Test		Pass	IEC 60695-10-2 \| 125°C +/- 2°C
Coeficiente de dilatación térmica	23.0 °C	7.4E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7.4E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Coeficiente de dilatación térmica transversal	23.0 °C	8E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 8E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Heat deflection temperature, 0.45 MPa		131 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 131 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		120 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 120 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		125 °C Show Supplier Material materials with Relative temperature index, electrical of 125 °C	UL 746B
Relative temperature index, mechanical impact		120 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 120 °C	UL 746B
Relative temperature index, mechanical strength		125 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 125 °C	UL 746B
Temperatura de flexión bajo carga		120 - 131 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 120 - 131 °C
Temperatura de reblandecimiento Vicat		137 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 137 °C	ISO 306 \| Rate B/50
Inflamabilidad	UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> Glow Wire Ignitability Temperature, 1.5 mm: 850°C IEC 60695-2-13 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥6mm UL 94 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101299184- -

Eléctrico

Property	Temperature	Value	Comment
Dielectric constant, 1GHz	23.0 °C	2.81 [-] Show Supplier Material materials with Dielectric constant, 1GHz of 2.81 [-]	ASTM ES 7-83 \| 1.1 GHz
Dissipation factor, 1GHz	23.0 °C	5.8E-3 [-] Show Supplier Material materials with Dissipation factor, 1GHz of 5.8E-3 [-]	ASTM ES 7-83 \| 1.1 GHz
High Amp Arc Ignition	23.0 °C	6 mm Show Supplier Material materials with High Amp Arc Ignition of 6 mm	≥, UL 746A \| PLC 0
Hot-Wire Ignition	23.0 °C	0.4 mm Show Supplier Material materials with Hot-Wire Ignition of 0.4 mm	≥, UL 746A \| PLC 3
Índice de seguimiento comparativo	23.0 °C	2 V Show Supplier Material materials with Índice de seguimiento comparativo of 2 V	UL 746A \| (UL) {PLC}

Óptico

Property	Value	Comment
Transmission	89.5 % Show Supplier Material materials with Transmission of 89.5 %	>, SABIC method \| at 3.0 mm

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.45 % Show Supplier Material materials with Contracción of 0.45 %	SABIC method \| 3.2 mm
Contracción transversal	23.0 °C	0.5 % Show Supplier Material materials with Contracción transversal of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		18 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 18 g/10min	ASTM D 1238 \| 300°C/1.2 kgf
Velocidad de flujo del volumen derretido		17 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 17 cm³/10min	ISO 1133 \| MVR at 300°C/1.2 kg

Technological properties

Property
Application areas	Personal Computing, LED Lighting, Medical Facility Infrastructure, Enclosures
Availability	Asia
Processing methods	Screw Speed: 40 to 70.0rpm Vent Depth: 0.025 to 0.076mm Back Pressure: 0.3 to 0.7MPa Melt Temperature: 290 to 310.0°C Nozzle Temperature: 280 to 305.0°C Drying Time (Cumulative): 48hrs Front - Zone 3 Temperature: 290 to 310.0°C Middle - Zone 2 Temperature: 275 to 300.0°C Shot to Cylinder Size: 40 to 60.0% Rear - Zone 1 Temperature: 265 to 290.0°C Mold Temperature: 70 to 95.0°C Drying Temperature: 120°C Maximum Moisture Content: 0.02% Drying Time: 3 to 4.0hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.