LEXAN™ Copolymer LUX7636C - Europe

Want to keep this datasheet? Save it now in your required format

Description

LEXAN LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN LUX7636C is available in diffusion colors.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Medical Equipment General

Ingeniería eléctrica

Electrónica

Pantallas

Automotriz

Construcción

Iluminación

Aeroespacial

Mostrar todo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.14 % Show Supplier Material materials with Absorción de agua of 0.14 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.2 g/cm³ Show Supplier Material materials with Densidad of 1.2 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.19 [-] Show Supplier Material materials with Densidad relativa of 1.19 [-]	ASTM D 792
Moisture absorption	23.0 °C	0.11 % Show Supplier Material materials with Moisture absorption of 0.11 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	23 % Show Supplier Material materials with Elongación of 23 %	ISO 527 \| break, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	85 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 85 J/m	ASTM D 256 \| notched, -30°C
Instrumented Impact, Total Energy	23.0 °C	66 J Show Supplier Material materials with Instrumented Impact, Total Energy of 66 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.5 GPa Show Supplier Material materials with Módulo de flexión of 2.5 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo elástico of 2.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	103 MPa Show Supplier Material materials with Resistencia a la flexión of 103 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	52 MPa Show Supplier Material materials with Resistencia a la tracción of 52 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²	ISO 179/1eA \| V-notch Edgew 80103 sp=62mm, -30°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m²	ISO 180/1A \| notched 80103, -30°C
Impact strength, Izod unnotched, ASTM	ASTM D 4812 \| unnotched, -30°C
Resistencia al choque, ensayo Charpy no entallado	ISO 179/1eU \| Unnotch Edgew 80103 sp=62mm, 23°C
Resistencia al choque, ensayo Izod no entallado	ISO 180/1U \| unnotched 80103, -30°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Ball Pressure Test		Pass	IEC 60695-10-2 \| 125°C +/- 2°C
Coeficiente de dilatación térmica	23.0 °C	7.2E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7.2E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Coeficiente de dilatación térmica transversal	23.0 °C	7.6E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.6E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		850 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 850 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 0.45 MPa		131 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 131 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		120 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 120 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		125 °C Show Supplier Material materials with Relative temperature index, electrical of 125 °C	UL 746B
Relative temperature index, mechanical impact		120 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 120 °C	UL 746B
Relative temperature index, mechanical strength		125 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 125 °C	UL 746B
Temperatura de flexión bajo carga		120 - 131 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 120 - 131 °C
Temperatura de reblandecimiento Vicat		139 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 139 °C	ISO 306 \| Rate B/120
Inflamabilidad	UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> Glow Wire Ignitability Temperature, 1.0 mm: 875°C IEC 60695-2-13 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101088456- -

Eléctrico

Property	Temperature	Value	Comment
Dielectric constant, 1GHz	23.0 °C	2.79 [-] Show Supplier Material materials with Dielectric constant, 1GHz of 2.79 [-]	ASTM ES 7-83 \| 1.1 GHz
Dissipation factor, 1GHz	23.0 °C	5.8E-3 [-] Show Supplier Material materials with Dissipation factor, 1GHz of 5.8E-3 [-]	ASTM ES 7-83 \|
High Amp Arc Ignition	23.0 °C	1 mm Show Supplier Material materials with High Amp Arc Ignition of 1 mm	≥, UL 746A \| PLC 0
Hot-Wire Ignition	23.0 °C	3 mm Show Supplier Material materials with Hot-Wire Ignition of 3 mm	≥, UL 746A \| PLC 2
Índice de seguimiento comparativo	23.0 °C	3 V Show Supplier Material materials with Índice de seguimiento comparativo of 3 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.55 % Show Supplier Material materials with Contracción of 0.55 %	SABIC method \| 3.2 mm
Contracción transversal	23.0 °C	0.6 % Show Supplier Material materials with Contracción transversal of 0.6 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 5 g/10min	ASTM D 1238 \| 300°C/1.2 kgf
Velocidad de flujo del volumen derretido		5 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 5 cm³/10min	ISO 1133 \| MVR at 300°C/1.2 kg

Technological properties

Property
Application areas	Air Cabin Interiors, Aircraft Seating, Document Handling, Enclosure/Housing/Cover, Heavy Vehicles, Lab Ware and Clinical Diagnostics, LED Lighting, Renal and Blood Handling, Wiring Devices, Wireless Communications
Availability	Europe,Asia,Americas
Processing methods	Screw Speed: 40 to 70.0rpm Drying Time (Cumulative): 48hrs Mold Temperature: 70 to 95.0°C Melt Temperature: 290 to 310.0°C Vent Depth: 0.025 to 0.076mm Drying Time: 3 to 4.0hrs Nozzle Temperature: 280 to 305.0°C Maximum Moisture Content: 0.02% Drying Temperature: 120°C Middle - Zone 2 Temperature: 275 to 300.0°C Rear - Zone 1 Temperature: 265 to 290.0°C Front - Zone 3 Temperature: 290 to 310.0°C Shot to Cylinder Size: 40 to 60.0% Back Pressure: 0.3 to 0.7MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.