General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad | 23.0 °C | 1.5 g/cm³ Show Supplier Material materials with Densidad of 1.5 g/cm³ | ASTM D 792 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 2.4 % Show Supplier Material materials with Elongación of 2.4 % | ISO 527 | break, 5 mm/min |
Módulo de flexión | 23.0 °C | 22.7 GPa Show Supplier Material materials with Módulo de flexión of 22.7 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 17.5 GPa Show Supplier Material materials with Módulo elástico of 17.5 GPa | ISO 527 | 1 mm/min |
Resistencia a la flexión | 23.0 °C | 317 MPa Show Supplier Material materials with Resistencia a la flexión of 317 MPa | ISO 178 | break, 2 mm/min |
Resistencia a la tracción | 23.0 °C | 140 MPa Show Supplier Material materials with Resistencia a la tracción of 140 MPa | ISO 527 | break, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m² | ISO 180/1A | notched 80*10*4, 23°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 40 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 40 kJ/m² | ISO 180/1U | 80*10*4, 23°C |
Aplicaciones térmicas
Property | Temperature | Value | Comment |
---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 1.4E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.4E-5 1/K | ASTM D 696 | -30°C to 30°C |
Coeficiente de dilatación térmica transversal | 23.0 °C | 2.9E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 2.9E-5 1/K | ASTM D 696 | -30°C to 30°C |
Technological properties
Property | ||
---|---|---|
Application areas | Engine Component | |
Availability | Europe,Americas | |
Processing methods | Drying Temperature: 150°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |