ULTEM™ Resin CRS5011 - Asia

Want to keep this datasheet? Save it now in your required format

Description

Transparent, Enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Automotriz

Piezas generales para vehículos

Automotive Interior

Vehículos comerciales

Camiones y remolques

Buses

Ferrocarriles

Aeroespacial

Materiales aeroespaciales

Aircraft Interiors

Defensa

Mostrar todo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	60 % Show Supplier Material materials with Elongación of 60 %	ASTM D 638 \| brk, Type I, 5 mm/min
Módulo de flexión	23.0 °C	3.1 GPa Show Supplier Material materials with Módulo de flexión of 3.1 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Módulo elástico	23.0 °C	2.9 GPa Show Supplier Material materials with Módulo elástico of 2.9 GPa	ASTM D 638 \| 5 mm/min
Resistencia a la flexión	23.0 °C	137 MPa Show Supplier Material materials with Resistencia a la flexión of 137 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	99 MPa Show Supplier Material materials with Resistencia a la tracción of 99 MPa	ASTM D 638 \| yld, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	58 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 58 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	204 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 204 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	160 °C Show Supplier Material materials with Relative temperature index, electrical of 160 °C	UL 746B
Relative temperature index, mechanical impact	155 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 155 °C	UL 746B
Relative temperature index, mechanical strength	160 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 160 °C	UL 746B
Temperatura de flexión bajo carga	204 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 204 °C
Inflamabilidad	UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221115- -

Eléctrico

Property	Temperature	Value	Comment
Dielectric constant, 60Hz	23.0 °C	3.2 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 3.2 [-]	ASTM D 150 \| 50/60 Hz
Dissipation factor, 50Hz	23.0 °C	2.1E-3 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 2.1E-3 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	1.5 mm Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	3 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 3 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	3 mm Show Supplier Material materials with Hot-Wire Ignition of 3 mm	≥, UL 746A \| PLC 0
Rigidez dieléctrica	23.0 °C	17.9 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 17.9 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Índice de seguimiento comparativo	23.0 °C	4 V Show Supplier Material materials with Índice de seguimiento comparativo of 4 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.4 % Show Supplier Material materials with Contracción of 0.4 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Fused Deposition Modeling (FDM), Enclosure/Housing/Cover, Electronic Components, Air Cabin Interiors, Aerospace, Aircraft Seating, Battery Cell, Data Transfer, Document Handling, Wireless Communications
Availability	Europe,Asia,Americas
Processing methods	Shot to Cylinder Size: 40 to 60.0% Back Pressure: 0.3 to 0.7MPa Front - Zone 3 Temperature: 365 to 390.0°C Drying Time: 4 to 6.0hrs Nozzle Temperature: 360 to 380.0°C Screw Speed: 40 to 70.0rpm Mold Temperature: 135 to 165.0°C Maximum Moisture Content: 0.02% Drying Temperature: 150°C Middle - Zone 2 Temperature: 355 to 375.0°C Vent Depth: 0.025 to 0.076mm Melt Temperature: 365 to 390.0°C Drying Time (Cumulative): 24hrs Rear - Zone 1 Temperature: 345 to 365.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.