ULTEM™ Resin 4001 - Europe

Want to keep this datasheet? Save it now in your required format

Description

PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Bienes de consumo

Electrodomésticos para el hogar

General Appliances

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6 % Show Supplier Material materials with Elongación of 6 %	ISO 527 \| yield, 50 mm/min
Módulo de flexión	23.0 °C	3 GPa Show Supplier Material materials with Módulo de flexión of 3 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	3 GPa Show Supplier Material materials with Módulo elástico of 3 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	125 MPa Show Supplier Material materials with Resistencia a la flexión of 125 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	75 MPa Show Supplier Material materials with Resistencia a la tracción of 75 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 10 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Taber Abrasion	23.0 °C	2 mg/1000cy Show Supplier Material materials with Taber Abrasion of 2 mg/1000cy	SABIC method \| CS-17, 1 kg

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	190 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 190 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical	170 °C Show Supplier Material materials with Relative temperature index, electrical of 170 °C	UL 746B
Relative temperature index, mechanical impact	170 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 170 °C	UL 746B
Relative temperature index, mechanical strength	170 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 170 °C	UL 746B
Temperatura de flexión bajo carga	190 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 190 °C
Inflamabilidad	Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> Glow Wire Flammability Index 960°C, passes at: 3.2mm IEC 60695-2-12 <br> UL Recognized, 94V-0 Flame Class Rating: ≥0.38mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221110- - <br> UL Recognized, 94-5VA Flame Class Rating: ≥1.5mm UL 94

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	1.6 mm Show Supplier Material materials with High Amp Arc Ignition of 1.6 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	2 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 2 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0.38 mm Show Supplier Material materials with Hot-Wire Ignition of 0.38 mm	≥, UL 746A \| PLC 1
Índice de seguimiento comparativo	23.0 °C	4 V Show Supplier Material materials with Índice de seguimiento comparativo of 4 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Pharmaceutical Manufacturing, Photo/Video Camera, Semiconductor, Respiratory, Surgical Devices, Personal Computing, Monitoring and Imaging, Laundry Dryer, Medical Device, LED Lighting, Washing Machine, Transmission/Transfer Comp, Toy, Auto Aftermarket, Document Handling, Enclosures, Energy Management, Electronic Components, Fluid Delivery, Gas/Electric Oven, Wire & cable
Availability	Europe,Asia,Americas
Processing methods	Drying Time: 4 to 6.0hrs Drying Temperature: 150°C Mold Temperature: 140 to 180.0°C Front - Zone 3 Temperature: 360 to 415.0°C Nozzle Temperature: 350 to 405.0°C Hopper Temperature: 80 to 120.0°C Rear - Zone 1 Temperature: 340 to 395.0°C Middle - Zone 2 Temperature: 350 to 405.0°C Melt Temperature: 370 to 410.0°C Maximum Moisture Content: 0.02%
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.