ULTEM™ Resin 1110F - Americas

Want to keep this datasheet? Save it now in your required format

Description

Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 listing. UL94 V0 and 5VA listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1110.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Envoltorios

Envasado de alimentos

Bienes de consumo

Aplicaciones decorativas

Electrodomésticos para el hogar

General Appliances

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	70 % Show Supplier Material materials with Elongación of 70 %	ASTM D 638 \| brk, Type I, 5 mm/min
Módulo de flexión	23.0 °C	3.7 GPa Show Supplier Material materials with Módulo de flexión of 3.7 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Módulo elástico	23.0 °C	3.7 GPa Show Supplier Material materials with Módulo elástico of 3.7 GPa	ASTM D 638 \| 5 mm/min
Resistencia a la flexión	23.0 °C	165 MPa Show Supplier Material materials with Resistencia a la flexión of 165 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	110 MPa Show Supplier Material materials with Resistencia a la tracción of 110 MPa	ASTM D 638 \| yld, Type I, 5 mm/min

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	198 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 198 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical	170 °C Show Supplier Material materials with Relative temperature index, electrical of 170 °C	UL 746B
Relative temperature index, mechanical impact	170 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 170 °C	UL 746B
Relative temperature index, mechanical strength	170 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 170 °C	UL 746B
Temperatura de flexión bajo carga	198 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 198 °C
Inflamabilidad	UL Recognized, 94V-0 Flame Class Rating: ≥0.75mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.4mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101048269- -

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	3 mm Show Supplier Material materials with High Amp Arc Ignition of 3 mm	≥, UL 746A \| PLC 3
High Volt Arc Track Rate	23.0 °C	2 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 2 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	3 mm Show Supplier Material materials with Hot-Wire Ignition of 3 mm	≥, UL 746A \| PLC 1
Índice de seguimiento comparativo	23.0 °C	4 V Show Supplier Material materials with Índice de seguimiento comparativo of 4 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Air Cabin Interiors, Medical Device
Availability	Europe,Asia,Americas
Processing methods	Back Pressure: 0.3 to 0.7MPa Drying Time: 4 to 6.0hrs Nozzle Temperature: 345 to 400.0°C Middle - Zone 2 Temperature: 340 to 400.0°C Front - Zone 3 Temperature: 345 to 400.0°C Vent Depth: 0.025 to 0.076mm Mold Temperature: 135 to 165.0°C Shot to Cylinder Size: 40 to 60.0% Maximum Moisture Content: 0.02% Drying Time (Cumulative): 24hrs Rear - Zone 1 Temperature: 330 to 400.0°C Drying Temperature: 150°C Screw Speed: 40 to 70.0rpm Melt Temperature: 350 to 400.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.