FLEX NORYL™ Resin WCP761 - Americas

Want to keep this datasheet? Save it now in your required format

Description

FLEX NORYL™ WCP761 resin is a high flow, flexible, non-reinforced injection moldable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and carries a UL94 flame rating of V0 at 6mm. FLEX NORYL WCP761 resin is intended for evaluation in over-molding applications such as plugs, strain reliefs, and connectors. It has a Shore A Hardness reading of 78 and exhibits low specific gravity, very low water absorption, and dimensional stability.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.1 % Show Supplier Material materials with Absorción de agua of 0.1 %	ASTM D 570 \| (23°C/48hrs)
Densidad relativa	23.0 °C	1.05 [-] Show Supplier Material materials with Densidad relativa of 1.05 [-]	ASTM D 792
Índice límite de óxigeno	23.0 °C	24 % Show Supplier Material materials with Índice límite de óxigeno of 24 %

Mecánica

Property	Temperature	Value	Comment
Dureza Shore A	23.0 °C	78 [-] Show Supplier Material materials with Dureza Shore A of 78 [-]	ASTM D 2240 \| 30S reading
Elongación	23.0 °C	165 % Show Supplier Material materials with Elongación of 165 %	ISO 527 \| break, 50 mm/min
Módulo de flexión	23.0 °C	0 GPa Show Supplier Material materials with Módulo de flexión of 0 GPa	ISO 178 \| 12.5 mm/min
Resistencia a la tracción	23.0 °C	8 MPa Show Supplier Material materials with Resistencia a la tracción of 8 MPa	ISO 527 \| break, 50 mm/min

Aplicaciones térmicas

Property	Value	Comment
Brittleness temperature	-40 °C Show Supplier Material materials with Brittleness temperature of -40 °C	<, ASTM D 746
Inflamabilidad	UL Recognized, 94V-0 Flame Class Rating: ≥6mm UL 94 <br> UL Recognized, 94HB Flame Class Rating: ≥1mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100082657- -

Eléctrico

Property	Temperature	Value	Comment
Constante dieléctrica, 1 MHz	23.0 °C	2.5 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.5 [-]	IEC 60250
Dissipation factor, 1MHz	23.0 °C	2E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 2E-3 [-]	IEC 60250
Rigidez dieléctrica	23.0 °C	25 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 25 kV/mm	IEC 60243-1 \| in oil, 2.0mm
Volume resistivity	23.0 °C	1.30E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.30E+16 Ω·cm	ASTM D 257
Índice de seguimiento comparativo	23.0 °C	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	IEC 60112 \|

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	1.08 % Show Supplier Material materials with Contracción of 1.08 %	ASTM D 955 \| 24 hrs
Contracción transversal	23.0 °C	1.1 % Show Supplier Material materials with Contracción transversal of 1.1 %	ASTM D 955 \| 24 hrs
Velocidad de flujo de la masa derretida		20 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 20 g/10min	ASTM D 1238 \| 250°C/2.16 kgf

Technological properties

Property
Application areas	Electronic Components, Wiring Devices, Wireless Communications, Power Manangement, Wire & cable
Availability	Asia,Americas
Processing methods	Nozzle Temperature: 220 to 250.0°C Middle - Zone 2 Temperature: 210 to 240.0°C Shot to Cylinder Size: 30 to 70.0% Back Pressure: 3 to 10.0MPa Rear - Zone 1 Temperature: 180 to 220.0°C Melt Temperature: 220 to 250.0°C Maximum Moisture Content: 0.01% Front - Zone 3 Temperature: 220 to 250.0°C Drying Time (Cumulative): 8hrs Drying Temperature: 65 to 75.0°C Drying Time: 4 to 6.0hrs Mold Temperature: 40 to 60.0°C Screw Speed: 30 to 80.0rpm Vent Depth: 0.03 to 0.05mm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.