NORYL PPX™ Resin PPX7110 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL PPX™ 7110 resin is a non-reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high impact resistance and good heat resistance along with hydrolytic and dimensional stability. NORYL PPX7110 resin is an excellent candidate for applications requiring high impact, chemical resistance, and good heat performance.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Ingeniería eléctrica

Electrónica

Pantallas

Automotriz

Piezas generales para vehículos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6.5 % Show Supplier Material materials with Elongación of 6.5 %	ASTM D 638 \| yld, Type I, 50 mm/min
Módulo de flexión	23.0 °C	1.6 GPa Show Supplier Material materials with Módulo de flexión of 1.6 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Módulo elástico	23.0 °C	1.3 GPa Show Supplier Material materials with Módulo elástico of 1.3 GPa	ASTM D 638 \| 50 mm/min
Resistencia a la flexión	23.0 °C	51 MPa Show Supplier Material materials with Resistencia a la flexión of 51 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa	ASTM D 638 \| yld, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	437 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 437 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	8.1E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 8.1E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	1.12E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 1.12E-4 1/K	ASTM E 831 \| -40°C to 40°C
Heat deflection temperature, 0.45 MPa		113 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 113 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		77 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 77 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga		77 - 113 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 77 - 113 °C
Temperatura de reblandecimiento Vicat		138 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 138 °C	ASTM D 1525 \| Rate B/50

Technological properties

Property
Application areas	Medical Device, Wiring Devices, Hot Water System, EV/HEV Battery, Document Handling
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 60 to 65.0°C Nozzle Temperature: 260 to 290.0°C Rear - Zone 1 Temperature: 225 to 275.0°C Middle - Zone 2 Temperature: 240 to 280.0°C Front - Zone 3 Temperature: 250 to 290.0°C Drying Time (Cumulative): 8hrs Vent Depth: 0.038 to 0.051mm Drying Time: 2 to 4.0hrs Back Pressure: 0.3 to 0.7MPa Shot to Cylinder Size: 30 to 70.0% Screw Speed: 20 to 100.0rpm Maximum Moisture Content: 0.02% Mold Temperature: 30 to 50.0°C Melt Temperature: 260 to 290.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.