NORYL PPX™ Resin PPX7110 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL PPX™ 7110 resin is a non-reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high impact resistance and good heat resistance along with hydrolytic and dimensional stability. NORYL PPX7110 resin is an excellent candidate for applications requiring high impact, chemical resistance, and good heat performance.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Ingeniería eléctrica

Electrónica

Pantallas

Automotriz

Piezas generales para vehículos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	195 % Show Supplier Material materials with Elongación of 195 %	ISO 527 \| break, 5 mm/min
Módulo de flexión	23.0 °C	1.7 GPa Show Supplier Material materials with Módulo de flexión of 1.7 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	1.5 GPa Show Supplier Material materials with Módulo elástico of 1.5 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	50 MPa Show Supplier Material materials with Resistencia a la flexión of 50 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	34 MPa Show Supplier Material materials with Resistencia a la tracción of 34 MPa	ISO 527 \| yield, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m²	ISO 180/1A \| notched 80104, -30°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	9E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9E-5 1/K	ISO 11359-2 \| 23°C to 60°C
Coeficiente de dilatación térmica transversal	23.0 °C	1.2E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 1.2E-4 1/K	ISO 11359-2 \| 23°C to 60°C
Heat deflection temperature, 0.45 MPa		108 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 108 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		75 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 75 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga		75 - 108 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 75 - 108 °C
Temperatura de reblandecimiento Vicat		100 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 100 °C	ISO 306 \| Rate B/120

Technological properties

Property
Application areas	Medical Device, Wiring Devices, Hot Water System, EV/HEV Battery, Document Handling
Availability	Europe,Asia,Americas
Processing methods	Drying Time: 2 to 4.0hrs Middle - Zone 2 Temperature: 240 to 285.0°C Front - Zone 3 Temperature: 250 to 290.0°C Drying Temperature: 60 to 65.0°C Mold Temperature: 40 to 60.0°C Hopper Temperature: 60 to 80.0°C Nozzle Temperature: 260 to 290.0°C Maximum Moisture Content: 0.02% Rear - Zone 1 Temperature: 225 to 275.0°C Melt Temperature: 260 to 290.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.