General
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Dureza Shore A | 23.0 °C | 91 [-] Show Supplier Material materials with Dureza Shore A of 91 [-] | ASTM D 2240 | 30S reading |
Elongación | 23.0 °C | 95 % Show Supplier Material materials with Elongación of 95 % | ISO 527 | break, 50 mm/min |
Módulo de flexión | 23.0 °C | 0.4 GPa Show Supplier Material materials with Módulo de flexión of 0.4 GPa | ISO 178 | 12.5 mm/min |
Resistencia a la tracción | 23.0 °C | 22 MPa Show Supplier Material materials with Resistencia a la tracción of 22 MPa | ISO 527 | break, 50 mm/min |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Brittleness temperature | -40 °C Show Supplier Material materials with Brittleness temperature of -40 °C | <, ASTM D 746 |
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Constante dieléctrica, 1 MHz | 23.0 °C | 2.7 [-] Show Supplier Material materials with Constante dieléctrica, 1 MHz of 2.7 [-] | IEC 60250 |
Dissipation factor, 1MHz | 23.0 °C | 4E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 4E-3 [-] | IEC 60250 |
Sheet resistivity, ROA | 23.0 °C | 4.20E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 4.20E+16 Ω | ASTM D 257 |
Volume resistivity | 23.0 °C | 5.10E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 5.10E+15 Ω·cm | ASTM D 257 |
Índice de seguimiento comparativo | 23.0 °C | 600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V | IEC 60112 | |
Rheological Properties
Property | Value | Comment |
---|---|---|
Velocidad de flujo de la masa derretida | 10 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 10 g/10min | ASTM D 1238 | 250°C/10.0 kgf |
Technological properties
Property | ||
---|---|---|
Application areas | Wire & cable | |
Availability | Europe,Americas | |
Processing methods | Drying Time (Cumulative): 12hrs | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |