NORYL PPX™ Resin PPX640 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL PPX™ 640 resin is a 40% glass reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high stiffness along with temperature performance, impact resistance, hydrolytic stability, and dimensional stability. NORYL PPX640 resin is an excellent candidate for applications requiring a good chemical resistance and high stiffness.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	6.4 % Show Supplier Material materials with Elongación of 6.4 %	ASTM D 638 \| brk, Type I, 5 mm/min
Módulo de flexión	23.0 °C	8.3 GPa Show Supplier Material materials with Módulo de flexión of 8.3 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Resistencia a la flexión	23.0 °C	150 MPa Show Supplier Material materials with Resistencia a la flexión of 150 MPa	ASTM D 790 \| brk, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	95 MPa Show Supplier Material materials with Resistencia a la tracción of 95 MPa	ASTM D 638 \| brk, Type I, 5 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	106 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 106 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	1.08E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.08E-5 1/K	ASTM E 831 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	6.3E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 6.3E-5 1/K	ASTM E 831 \| -40°C to 40°C
Heat deflection temperature, 0.45 MPa		158 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 158 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		146 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 146 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga		146 - 158 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 146 - 158 °C
Temperatura de reblandecimiento Vicat		163 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 163 °C	ASTM D 1525 \| Rate B/50

Technological properties

Property
Application areas	Water Treatment/Filtration, Hot Water System
Availability	Europe,Asia,Americas
Processing methods	Front - Zone 3 Temperature: 255 to 300.0°C Middle - Zone 2 Temperature: 250 to 290.0°C Maximum Moisture Content: 0.02% Screw Speed: 20 to 100.0rpm Mold Temperature: 40 to 65.0°C Drying Time: 2 to 4.0hrs Back Pressure: 0.3 to 0.7MPa Vent Depth: 0.051 to 0.076mm Nozzle Temperature: 260 to 305.0°C Shot to Cylinder Size: 30 to 70.0% Drying Temperature: 65 to 75.0°C Rear - Zone 1 Temperature: 245 to 290.0°C Melt Temperature: 260 to 305.0°C Drying Time (Cumulative): 8hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.