NORYL™ Resin PX1390 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ PX1390 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade inherently meets UL94 HB flame rating. NORYL PX1390 resin exhibits excellent electrical properties, easy processability, high heat resistance, and good dimensional stabilty. It is an excellent candidate for automotive connector applications.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Healthcare

Equipos médicos

Ophthalmics

Ingeniería eléctrica

Electrónica

Pantallas

Bienes de consumo

Electrodomésticos para el hogar

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.1 % Show Supplier Material materials with Absorción de agua of 0.1 %	ASTM D 570 \| (23°C/24hrs)
Densidad relativa	23.0 °C	1.06 [-] Show Supplier Material materials with Densidad relativa of 1.06 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	30 % Show Supplier Material materials with Elongación of 30 %	ASTM D 638 \| brk, Type I, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	288 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 288 J/m	ASTM D 256 \| notched, 23°C
Módulo de flexión	23.0 °C	2.3 GPa Show Supplier Material materials with Módulo de flexión of 2.3 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Resistencia a la flexión	23.0 °C	99 MPa Show Supplier Material materials with Resistencia a la flexión of 99 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	62 MPa Show Supplier Material materials with Resistencia a la tracción of 62 MPa	ASTM D 638 \| yld, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	288 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 288 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	7.2E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7.2E-5 1/K	ASTM E 831 \| 0°C to 100°C
Heat deflection temperature, 0.45 MPa		154 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 154 °C	ASTM D 648 \| 6.4 mm, unannealed
Heat deflection temperature, 1.80 MPa		146 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 146 °C	ASTM D 648 \| 6.4 mm, unannealed
Temperatura de flexión bajo carga		146 - 154 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 146 - 154 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Gas/Electric Oven, Head Protection, Enclosures, Electronic Components, Data Transfer
Availability	Asia,Americas
Processing methods	Rear - Zone 1 Temperature: 260 to 305.0°C Screw Speed: 20 to 100.0rpm Middle - Zone 2 Temperature: 270 to 310.0°C Nozzle Temperature: 295 to 315.0°C Drying Temperature: 105 to 110.0°C Drying Time: 3 to 4.0hrs Front - Zone 3 Temperature: 280 to 315.0°C Shot to Cylinder Size: 30 to 70.0% Mold Temperature: 75 to 105.0°C Maximum Moisture Content: 0.02% Back Pressure: 0.3 to 0.7MPa Melt Temperature: 295 to 315.0°C Drying Time (Cumulative): 8hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.