NORYL PPX™ Resin PPX7115 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL PPX™ 7115 resin is a non-reinforced alloy of polyphenylene ether (PPE) + polypropylene (PP). This injection moldable grade exhibits high modulus, high-temperature performance, excellent melt strength, impact resistance, hydrolytic and dimensional stability. NORYL PPX7115 resin is an excellent candidate for applications requiring high modulus and chemical resistance.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	75 % Show Supplier Material materials with Elongación of 75 %	ISO 527 \| break, 50 mm/min
Módulo de flexión	23.0 °C	1.4 GPa Show Supplier Material materials with Módulo de flexión of 1.4 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Módulo elástico	23.0 °C	1.4 GPa Show Supplier Material materials with Módulo elástico of 1.4 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	51 MPa Show Supplier Material materials with Resistencia a la flexión of 51 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa	ISO 527 \| yield, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	534 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 534 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	112 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 112 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa	85 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 85 °C	ASTM D 648 \| 3.2mm, unannealed
Temperatura de flexión bajo carga	85 - 112 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 85 - 112 °C
Temperatura de reblandecimiento Vicat	131 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 131 °C	ISO 306 \| Rate A/50

Technological properties

Property
Application areas	Pipe/Fitting
Availability	Americas
Processing methods	Drying Time: 2 to 4.0hrs Drying Time (Cumulative): 8hrs Melt Temperature: 260 to 290.0°C Rear - Zone 1 Temperature: 225 to 275.0°C Drying Temperature: 60 to 65.0°C Screw Speed: 20 to 100.0rpm Front - Zone 3 Temperature: 250 to 290.0°C Maximum Moisture Content: 0.02% Middle - Zone 2 Temperature: 240 to 280.0°C Mold Temperature: 30 to 50.0°C Nozzle Temperature: 260 to 290.0°C Vent Depth: 0.038 to 0.051mm Shot to Cylinder Size: 30 to 70.0% Back Pressure: 0.3 to 0.7MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.