Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 5 % Show Supplier Material materials with Elongación of 5 % | ISO 527 | yield, 50 mm/min |
Módulo de flexión | 23.0 °C | 1.5 GPa Show Supplier Material materials with Módulo de flexión of 1.5 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 1.4 GPa Show Supplier Material materials with Módulo elástico of 1.4 GPa | ISO 527 | 1 mm/min |
Resistencia a la flexión | 23.0 °C | 51 MPa Show Supplier Material materials with Resistencia a la flexión of 51 MPa | ISO 178 | yield, 2 mm/min |
Resistencia a la tracción | 23.0 °C | 35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa | ISO 527 | yield, 50 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 10 kJ/m² | ISO 180/1A | 80*10*4, -30°C |
Aplicaciones térmicas
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 0.45 MPa | 114 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 114 °C | ISO 75/Be | Edgew 120*10*4 sp=100mm |
Heat deflection temperature, 1.80 MPa | 83 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 83 °C | ISO 75/Ae | Edgew 120*10*4 sp=100mm |
Temperatura de flexión bajo carga | 83 - 114 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 83 - 114 °C | |
Temperatura de reblandecimiento Vicat | 80 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 80 °C | ISO 306 | Rate B/50 |
Technological properties
Property | ||
---|---|---|
Application areas | Pipe/Fitting | |
Availability | Americas | |
Processing methods | Middle - Zone 2 Temperature: 240 to 285.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |