NORYL GTX™ Resin GTX918W - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Automotriz

Piezas generales para vehículos

Automotive Interior

Construcción

Water Management

Bienes de consumo

Electrodomésticos para el hogar

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	53 % Show Supplier Material materials with Elongación of 53 %	ASTM D 638 \| brk, Type I, 50 mm/min
Módulo de flexión	23.0 °C	2.4 GPa Show Supplier Material materials with Módulo de flexión of 2.4 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Resistencia a la flexión	23.0 °C	98 MPa Show Supplier Material materials with Resistencia a la flexión of 98 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Resistencia a la tracción	23.0 °C	62 MPa Show Supplier Material materials with Resistencia a la tracción of 62 MPa	ASTM D 638 \| yld, Type I, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	202 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 202 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	188 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 188 °C	ASTM D 648 \| 3.2 mm, unannealed
Temperatura de flexión bajo carga	188 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 188 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	1.6 % Show Supplier Material materials with Contracción of 1.6 %	SABIC method \| on tensile bar

Technological properties

Property
Application areas	Electronic Components, Console, Cooking Range, Auto Electrical, Circuit Protection, Meter Gas
Availability	Europe,Asia,Americas
Processing methods	Front - Zone 3 Temperature: 265 to 295.0°C Mold Temperature: 65 to 95.0°C Melt Temperature: 270 to 295.0°C Shot to Cylinder Size: 30 to 50.0% Drying Time (Cumulative): 8hrs Nozzle Temperature: 270 to 295.0°C Vent Depth: 0.013 to 0.038mm Maximum Moisture Content: 0.07% Drying Temperature: 95 to 105.0°C Middle - Zone 2 Temperature: 260 to 295.0°C Back Pressure: 0.3 to 1.4MPa Screw Speed: 20 to 100.0rpm Minimum Moisture Content: 0.02% Drying Time: 3 to 4.0hrs Rear - Zone 1 Temperature: 255 to 295.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.