NORYL GTX™ Resin GTX918W - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL GTX™ 918W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, and high melt flow. NORYL GTX918W resin may be an excellent candidate for automotive under-the-hood and electrical applications requiring the retention of properties while under thermal load.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Automotriz

Piezas generales para vehículos

Automotive Interior

Construcción

Water Management

Bienes de consumo

Electrodomésticos para el hogar

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	30 % Show Supplier Material materials with Elongación of 30 %	ISO 527 \| break, 50 mm/min
Módulo de flexión	23.0 °C	2.2 GPa Show Supplier Material materials with Módulo de flexión of 2.2 GPa	ISO 178 \| 2 mm/min
Resistencia a la flexión	23.0 °C	85 MPa Show Supplier Material materials with Resistencia a la flexión of 85 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	55 MPa Show Supplier Material materials with Resistencia a la tracción of 55 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	20 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 20 kJ/m²	ISO 180/1A \| 80104, 23°C

Aplicaciones térmicas

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	185 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 185 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga	185 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 185 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	1.3 % Show Supplier Material materials with Contracción of 1.3 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Electronic Components, Console, Cooking Range, Auto Electrical, Circuit Protection, Meter Gas
Availability	Europe,Asia,Americas
Processing methods	Melt Temperature: 280 to 310.0°C Middle - Zone 2 Temperature: 270 to 290.0°C Drying Temperature: 100 to 120.0°C Drying Time: 2 to 3.0hrs Hopper Temperature: 60 to 80.0°C Maximum Moisture Content: 0.07% Nozzle Temperature: 270 to 300.0°C Front - Zone 3 Temperature: 280 to 300.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Mold Temperature: 80 to 120.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.