NORYL™ Resin ENG265F - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ ENG265F resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This material is suitable for profile extrusion and exhibits very good hydrolytic stability, low moisture absorption, good dimensional stability. NORYL ENG265F resin certifies to NSF 61 and is an excellent candidate for water management applications such as extruded tubes for reverse osmosis systems.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.06 % Show Supplier Material materials with Absorción de agua of 0.06 %	ASTM D 570 \| (23°C/24hrs)
Densidad relativa	23.0 °C	1.06 [-] Show Supplier Material materials with Densidad relativa of 1.06 [-]	ASTM D 792 \|

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	3.1 % Show Supplier Material materials with Elongación of 3.1 %	ISO 527 \| yield
Gardner Impact	23.0 °C	5 J Show Supplier Material materials with Gardner Impact of 5 J	ASTM D 3029 \| -40°C
Hardness, Rockwell R	23.0 °C	119 [-] Show Supplier Material materials with Hardness, Rockwell R of 119 [-]	ASTM D 785
Impact strength, Izod notched, ASTM	23.0 °C	114 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 114 J/m	ASTM D 256
Instrumented Impact, Total Energy	23.0 °C	39 J Show Supplier Material materials with Instrumented Impact, Total Energy of 39 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	2.5 GPa Show Supplier Material materials with Módulo de flexión of 2.5 GPa	ISO 178
Módulo elástico	23.0 °C	2.6 GPa Show Supplier Material materials with Módulo elástico of 2.6 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	95 MPa Show Supplier Material materials with Resistencia a la flexión of 95 MPa	ISO 178
Resistencia a la tracción	23.0 °C	50 MPa Show Supplier Material materials with Resistencia a la tracción of 50 MPa	ISO 527 \| break
Resistencia al choque, ensayo Charpy entallado	23.0 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	ISO 179/2C \| 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 13 kJ/m²	ISO 180/1A \| 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	5.94E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5.94E-5 1/K	ASTM E 831 \| -40°C to 95°C
Heat deflection temperature, 0.45 MPa		132 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 132 °C	ASTM D 648 \| 3.2 mm, unannealed
Heat deflection temperature, 1.80 MPa		126 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 126 °C	ASTM D 648 \| 6.4 mm, unannealed
Relative temperature index, electrical		105 °C Show Supplier Material materials with Relative temperature index, electrical of 105 °C	UL 746B
Relative temperature index, mechanical impact		90 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 90 °C	UL 746B
Relative temperature index, mechanical strength		105 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 105 °C	UL 746B
Temperatura de flexión bajo carga		126 - 132 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 126 - 132 °C
Temperatura de reblandecimiento Vicat		141 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 141 °C	ISO 306 \| Rate B/120
Inflamabilidad	UL Recognized, 94HB Flame Class Rating: ≥1.5mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=221150- -

Eléctrico

Property	Temperature	Value	Comment
Dielectric constant, 60Hz	23.0 °C	2.65 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.65 [-]	ASTM D 150 \| 50/60 Hz
Dissipation factor, 50Hz	23.0 °C	4E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 4E-4 [-]	ASTM D 150 \| 50/60 Hz
High Amp Arc Ignition	23.0 °C	6 mm Show Supplier Material materials with High Amp Arc Ignition of 6 mm	≥, UL 746A \| PLC 4
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	6 mm Show Supplier Material materials with Hot-Wire Ignition of 6 mm	≥, UL 746A \| PLC 4
Rigidez dieléctrica	23.0 °C	19.7 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 19.7 kV/mm	ASTM D 149 \| in oil, 3.2 mm
Índice de seguimiento comparativo	23.0 °C	3 V Show Supplier Material materials with Índice de seguimiento comparativo of 3 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		8.5 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 8.5 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Velocidad de flujo del volumen derretido		8 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 8 cm³/10min	ISO 1133 \| MVR at 280°C/5.0 kg

Technological properties

Property
Application areas	Pipe/Fitting
Availability	Americas
Processing methods	Adapter Temperature: 250°C Drying Time (Cumulative): 8hrs Barrel - Zone 2 Temperature: 205°C Melt Temperature: 225 to 255.0°C Maximum Moisture Content: 0.02% Die Temperature: 250°C Barrel - Zone 4 Temperature: 225°C Drying Temperature: 105 to 115.0°C Barrel - Zone 3 Temperature: 225°C Barrel - Zone 1 Temperature: 205°C Drying Time: 2 to 4.0hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.