NORYL™ Resin ER006987 - Europe

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ ER006987 resin is a 30% glass reinforced blend of impact modified polyphenylene ether (PPE) + polystyrene (PS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61, ACS, WRAS, KTW, and W270 listing for global potable water use for specific colors is pending. NORYL ER006987 resin exhibits good fatigue performance, excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.3 g/cm³ Show Supplier Material materials with Densidad of 1.3 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.4 % Show Supplier Material materials with Elongación of 2.4 %	ISO 527 \| break, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	85 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 85 J/m	ASTM D 256 \| notched, -30°C
Impact strength, Izod unnotched, ASTM	23.0 °C	550 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 550 J/m	ASTM D 4812 \| unnotched, -30°C
Módulo de flexión	23.0 °C	8.4 GPa Show Supplier Material materials with Módulo de flexión of 8.4 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	9.5 GPa Show Supplier Material materials with Módulo elástico of 9.5 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	200 MPa Show Supplier Material materials with Resistencia a la flexión of 200 MPa	ISO 178 \| break, 2 mm/min
Resistencia a la tracción	23.0 °C	131 MPa Show Supplier Material materials with Resistencia a la tracción of 131 MPa	ISO 527 \| break, 5 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Resistencia al choque, ensayo Charpy no entallado	23.0 °C	50 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 50 kJ/m²	ISO 179/1eU \| Unnotch Edgew 80104 sp=62mm, -30°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 12 kJ/m²	ISO 180/1A \| 80104, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	45 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 45 kJ/m²	ISO 180/1U \| unnotched 80104, -30°C

Aplicaciones térmicas

Property	Value	Comment
Glow Wire Flammability Index	775 °C Show Supplier Material materials with Glow Wire Flammability Index of 775 °C
Glow Wire Ignition Temperature	800 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 800 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 0.45 MPa	155 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 155 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa	149 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 149 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga	149 - 155 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 149 - 155 °C
Temperatura de reblandecimiento Vicat	167 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 167 °C	ISO 306 \| Rate A/120
Inflamabilidad	Glow Wire Ignitability Temperature, 1.5 mm: 825°C IEC 60695-2-13 <br> Glow Wire Flammability Index, 1.5 mm: 825°C IEC 60695-2-12

Rheological Properties

Property	Value	Comment
Velocidad de flujo de la masa derretida	30 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 30 g/10min	ASTM D 1238 \| 300°C/10 kgf
Velocidad de flujo del volumen derretido	26 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 26 cm³/10min	ISO 1133 \| MVR at 300°C/10.0 kg

Technological properties

Property
Application areas	Hydroblocks
Availability	Europe
Processing methods	Drying Temperature: 100 to 120.0°C Drying Time: 2 to 4.0hrs Maximum Moisture Content: 0.02% Melt Temperature: 290 to 320.0°C Nozzle Temperature: 290 to 320.0°C Front - Zone 3 Temperature: 300 to 310.0°C Middle - Zone 2 Temperature: 280 to 300.0°C Rear - Zone 1 Temperature: 270 to 280.0°C Hopper Temperature: 60 to 80.0°C Mold Temperature: 80 to 120.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.