ULTEM™ Resin DT1810EV - Americas

Want to keep this datasheet? Save it now in your required format

Description

Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming, UL94 V0 listed.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.36 % Show Supplier Material materials with Absorción de agua of 0.36 %	ISO 62-1 \| (23°C/saturated)
Densidad	23.0 °C	1.28 g/cm³ Show Supplier Material materials with Densidad of 1.28 g/cm³	ISO 1183
Densidad relativa	23.0 °C	1.28 [-] Show Supplier Material materials with Densidad relativa of 1.28 [-]	ASTM D 792 \|
Moisture absorption	23.0 °C	0.08 % Show Supplier Material materials with Moisture absorption of 0.08 %	ISO 62 \| (23°C / 50% RH)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	7 % Show Supplier Material materials with Elongación of 7 %	ISO 527 \| yield, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	32 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 32 J/m	ASTM D 256
Instrumented Impact, Total Energy	23.0 °C	48 J Show Supplier Material materials with Instrumented Impact, Total Energy of 48 J	ASTM D 3763 \| 23°C
Módulo de flexión	23.0 °C	3.1 GPa Show Supplier Material materials with Módulo de flexión of 3.1 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	135 MPa Show Supplier Material materials with Resistencia a la flexión of 135 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	98 MPa Show Supplier Material materials with Resistencia a la tracción of 98 MPa	ISO 527 \| yield, 5 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	2 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 2 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Resistencia al choque, ensayo Izod entallado	23.0 °C	2 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 2 kJ/m²	ISO 180/1A \| 80104, 23°C
Impact strength, Izod unnotched, ASTM	ASTM D 4812 \| unnotched, -30°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	5.5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 5.5E-5 1/K	ISO 11359-2 \| 23°C to 150°C
Coeficiente de dilatación térmica transversal	23.0 °C	5.5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 5.5E-5 1/K	ISO 11359-2 \| 23°C to 150°C
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		825 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 825 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 1.80 MPa		168 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 168 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Relative temperature index, electrical		105 °C Show Supplier Material materials with Relative temperature index, electrical of 105 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		105 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 105 °C	UL 746B
Temperatura de flexión bajo carga		168 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 168 °C
Temperatura de reblandecimiento Vicat		192 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 192 °C	ISO 306 \| Rate B/50
Inflamabilidad	UL Recognized, 94-5VA Flame Class Rating: ≥3mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥3mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.75mm UL 94 <br> UL Recognized, 94V-2 Flame Class Rating: ≥0.75mm UL 94 <br> Glow Wire Ignitability Temperature, 1.5 mm: 825°C IEC 60695-2-13 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=640471- -

Eléctrico

Property	Temperature	Value	Comment
High Amp Arc Ignition	23.0 °C	0.75 mm Show Supplier Material materials with High Amp Arc Ignition of 0.75 mm	≥, UL 746A \| PLC 1
Hot-Wire Ignition	23.0 °C	3 mm Show Supplier Material materials with Hot-Wire Ignition of 3 mm	≥, UL 746A \| PLC 1
Índice de seguimiento comparativo	23.0 °C	4 V Show Supplier Material materials with Índice de seguimiento comparativo of 4 V	UL 746A \| (UL) {PLC}

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm
Velocidad de flujo de la masa derretida		43 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 43 g/10min	ASTM D 1238 \| 337°C/6.6 kgf
Velocidad de flujo del volumen derretido		56 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 56 cm³/10min	ISO 1133 \| MVR at 360°C/5.0 kg

Technological properties

Property
Application areas	Electronic Components, Data Transfer, Data Management, Personal Computing, Surgical Devices, Watch/Jewelry
Availability	Europe,Asia,Americas
Processing methods	Mold Temperature: 95 to 135.0°C Shot to Cylinder Size: 40 to 60.0% Nozzle Temperature: 325 to 350.0°C Vent Depth: 0.025 to 0.076mm Screw Speed: 40 to 70.0rpm Rear - Zone 1 Temperature: 310 to 330.0°C Drying Temperature: 135°C Drying Time: 4 to 6.0hrs Front - Zone 3 Temperature: 330 to 355.0°C Drying Time (Cumulative): 12hrs Melt Temperature: 330 to 355.0°C Back Pressure: 0.3 to 0.7MPa Middle - Zone 2 Temperature: 320 to 345.0°C Maximum Moisture Content: 0.02%
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.