NORYL™ Resin PX0844 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ PX0844 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This grade exhibits very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, and property retention over a wide temperature range. NORYL PX0844 resin is inherently UL94 HB and is an excellent candidate for automotive interior applications such as instrument panels, audio components, speaker housings, and interior trim. *see NORYL PX0888 resin for higher heat resistance.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Electrónica

Pantallas

Automotriz

Piezas generales para vehículos

Exterior automotriz

Construcción

Envoltorios

Water Management

Bienes de consumo

Electrodomésticos para el hogar

Mostrar todo

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.1 % Show Supplier Material materials with Absorción de agua of 0.1 %	ASTM D 570 \| (23°C/24hrs)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	40 % Show Supplier Material materials with Elongación of 40 %	ISO 527 \| break, 50 mm/min
Módulo de flexión	23.0 °C	2.2 GPa Show Supplier Material materials with Módulo de flexión of 2.2 GPa	ISO 178 \| 2 mm/min
Resistencia a la flexión	23.0 °C	65 MPa Show Supplier Material materials with Resistencia a la flexión of 65 MPa	ISO 178 \| yield, 2 mm/min
Resistencia a la tracción	23.0 °C	35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa	ISO 527 \| break, 50 mm/min
Resistencia al choque, ensayo Izod entallado	23.0 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 10 kJ/m²	ISO 180/1A \| 80104, -30°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	7.38E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7.38E-5 1/K	ASTM E 831 \| 0°C to 100°C
Heat deflection temperature, 0.45 MPa		122 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 122 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		107 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 107 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Temperatura de flexión bajo carga		107 - 122 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 107 - 122 °C

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.5 % Show Supplier Material materials with Contracción of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Motorcycle, Refrigerator, Photovoltaic Components, Plumbing, Wearables, Wiring Devices, Auto Electrical, Audio, Auto Aftermarket, Data Management, Data Transfer, Document Handling, Drain Pan, Gas/Electric Oven, Heavy Vehicles, Hygiene/Personal Care, Food Transportation, Enclosures, Enclosure/Housing/Cover, Electronic Components
Availability	Europe,Asia,Americas
Processing methods	Vent Depth: 0.038 to 0.051mm Screw Speed: 20 to 100.0rpm Melt Temperature: 275 to 305.0°C Middle - Zone 2 Temperature: 255 to 300.0°C Nozzle Temperature: 275 to 305.0°C Drying Temperature: 105 to 110.0°C Rear - Zone 1 Temperature: 245 to 295.0°C Mold Temperature: 70 to 100.0°C Drying Time: 3 to 4.0hrs Shot to Cylinder Size: 30 to 70.0% Maximum Moisture Content: 0.02% Front - Zone 3 Temperature: 265 to 305.0°C Drying Time (Cumulative): 8hrs Back Pressure: 0.3 to 0.7MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.